Question about Electrolux EW1200i Front Load Washer / Dryer

2 Answers

Aqualux 1200i washs fine but wont spin for longer than 5 seconds

Posted by on

  • 1 more comment 
  • adieboyo Nov 27, 2007

    The wash cycle completes, but leaves the clothes sodden. I consulted the troubleshooting guide and it looks as if the "electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum".

    I have tried running a spin cycle with nothing in the drum and it still doesn't get up to speed (it attempts to, but just seems to trip out). The machine is draining with no problems.

    Does it look as if I need new brushes/motor? A friend has had a look at the brushes, he does think they could do with replacing.

    Any suggestions would be much appreciated.

    Many thanks,

    Adrian

    P.S. The machine is approximately 4 years old.

  • Anonymous May 04, 2009

    won't spin more than 5 secs.

  • Anonymous May 16, 2009

    I have the same problem. Did you ever figure out what was wrong with it?

×

Ad

2 Answers

rosstaylor5
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did either of you fix this fault? i have the same problem?

Posted on Sep 28, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you happen to solve the problem? I am having the same exact issue with mine...washes fine, but won't do the spin cycle. it spins counter clockwise really slow at first, presumably to balance the clothes, and then starts to spin up clockwise (to do the spin cycle) but then whinnies and then stops....!

Posted on Mar 26, 2010

  • jrinco11 Dec 06, 2013

    For anyone who finds this post w/the same issue, turns out the controllerboard/motherboard had gone bad and had to be replaced.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Letters have faded on programme dial need a picture of where they should be
There are a couple of listings on ebay

http://www.bing.com/images/search?q=Electrolux+aqualux+1000&view=detailv2&&id=B9EF4177F1D1D374FEC77CCF71D90DA34189C725&selectedIndex=0&ccid=IjDsi6rt&simid=608023535769421040&thid=OIP.M2230ec8baaed6b9c36a368819fdbc682o0&ajaxhist=0

The one below is still active and you can zoom in.

http://www.ebay.co.uk/itm/Electrolux-EW-1200i-All-in-One-Washing-Machine-/291635154296?hash=item43e6cf4d78

Dec 09, 2015 | Electrolux Washing Machines

1 Answer

What can I do its shwing error which says ie
IE - Water level sensor error Water sensor fails to send signal for longer than 5 seconds. Press POWER button. No other buttons work:
· Check wiring harness
· Check pressure sensor switch
· Check circuit board

May 19, 2015 | Washing Machines

1 Answer

EW/200i, Electrolux Aqualux 1200I, what size belt fits it, is it Lenght 1195?
Can you provide the exact model number for this unit?

Sep 18, 2012 | Electrolux EW1200i Front Load Washer /...

1 Answer

My 1200I washes ok but does not get to spin speed, I suspect its the motor brushes, is this correct?
It seems unlikely as if the motor brushes were worn I would expect problems making the motor turn at all. It would seem that a number of owners have had the same problem and it is due to the load sensor thinking that the load is not even. If it thinks the machine will be subject to excessive vibration it stops the spin progressively. I don't know how the machine checks for uneven load, there must be a vibration sensor, maybe it gets worn and needs replacing, but I suggest you redistribute the load and spin again. Make sure the machine is level and not rocking. Also have a look here http://electrolux.manualsonline.com/washerdryer/ew_1200_i/possible-causes-21.php Please rate my reply thank you.

Jan 05, 2011 | Electrolux EW1200i Front Load Washer /...

1 Answer

Washer/dryernot drying-Electrolux - Aqualux 1200 EW
check the drain filter is clear / pumping efficiency good. possible blockage in side chamber on righthand side. fan motor assy on top of chamber may be faulty. a condensing water valve could be faulty its the dual cold valve that the cold hose connects to without it you just get a steam and hot clothes.

Jul 20, 2010 | Electrolux Washing Machines

2 Answers

Indesit washing machine fills up and starts cycle and is stuck and goes on for hours and hours!!! wont drain or spin! I can drain it by manually turning knob to the spin cycle so drain pump is fine? could...
Could be heater. Try machine on rince cycle.Not pressure switch. If mahine works on rince then chances are heater. But this should not affect spin

Mar 09, 2010 | Indesit W 123 Front Load Washer

1 Answer

I have a roper washer approx. 5 yrs old. it washes fine but wont spin out and makes a real loud noise when it gets to spin the tub doesnt turn
hello mam please check the timer switch .

Oct 02, 2009 | Washing Machines

1 Answer

Electrolux aqualux 1200 ew
I had a similar problem with a different make recently. After cleaning the filter which didn't seem to have anything in it and rinsing the filters on the in and out pipes I took all the clothes out and ran it empty on two different full programmes and somehow the gremlins disappeared and it works fine now.

Oct 16, 2008 | Electrolux EW1000i Front Load Washer

1 Answer

DRUM NOT SPINNING
Disconnect your washer's plug for 5 minutes or more from the wall socket. Plug in. Press "end of cycle" button for over 5 seconds, the child lock comes off.
Press it again and the child lock comes on................ If this does not work, try the pre-wash button likewise.

Nov 22, 2007 | Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

Repair it
Probably your machine need new motor brushes.

Oct 14, 2007 | Electrolux EW1200i Front Load Washer /...

Not finding what you are looking for?

View Most Popular

EW1200i Front Load Washer / Dryer

  • Washing Machines

Related Question

Letters have faded on programme dial need a picture of where they should be

  • Electrolux Washing Machines

Open Questions:

0 Answers

is there a fuse in my washing machine ewf 1035

Jul 09, 2014 | Electrolux EW1200i Front Load Washer /...

0 Answers

ew757 water pump replacement Where can I find the water pump part

Jun 16, 2014 | Electrolux EW1200i Front Load Washer /...

0 Answers

can not start the machine When choosing a program to run, all lights in the display are on. Nothing happen when click the start button. Any idea what I can do ?

Apr 04, 2014 | Electrolux EW1200i Front Load Washer /...

0 Answers

EWF 851V can not start Can not start all lights are on in the display

Apr 04, 2014 | Electrolux EW1200i Front Load Washer /...

See all Electrolux EW1200i Front Load Washer / Dryer Questions

Related Topics

Electrolux EW1200i Front Load Washer / Dryer Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Electrolux EW1000i Front Load...

Electrolux Washing Machines

Electrolux EW1200i Front Load...

Electrolux Washing Machines

Electrolux Washing Machines

Top Electrolux Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

tom wright
tom wright

Level 2 Expert

219 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...