Question about Ricoh Office Equipment & Supplies

1 Answer

A lot of problem with RICOH Aficio SP c210

Hi to all, i've a problem with 3 ricoh Aficio SP 210. When i try to print in color or B/w, in single or multiple copy, the paper stop in the just entering in the fuser. I try to clean all the sensor, i try also whit the pressure coil but nothing to do... Please please Help me help me helpmeee eeee... This kind of printer is getting me out of mind and giving Ricoh a bad spot.

Sorry for my english, i'm writing from north of Italy (Garda Lake)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Hi,try to check internal fuser section b/c there are a lot of parts in fuser for example:-heat roll,pressure roll & web roll especially if the web is damage there is the problem try to replace it.
another but easy solution clear piece of paper in fuser.

Posted on May 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make reset for sc 544 for Ricoh Aficio SP 9100DN


Reseting SC 544 error code on Ricoh copier
Press CLEAR MODE(yellow) key,
Press 1 , 0 , 7
Press and hold down CLEAR/STOP (red) key for more 5 sec.
Press in the SP Mode( on the touch pane)
Go to sp5810 and reset SC code
Open the front door turn OFF the power main switch, and turn it ON

Heating roller overheat 1 (hardware error)
During stand-by mode or a print job, the detected heating roller
temperature reaches 220 °C.
Defective PSU
Defective IOB
Defective BCU
Defective fusing control system
Related SC code: SC 543
1. Replace the PSU.
2. Replace the IOB.
3. Replace the BCU.

Jun 08, 2016 | Ricoh Aficio SP 9100DN Laser Printer...

1 Answer

Ricoh aficio sp-1100 sf toner chip reset problem


WE HAVE RICOH PRINTER SP 1100SF & REPLACED CARTRIDGE WITH NEW RECYCLED BLACK TONNER CARTRIDGE FROM POWER POINT, BUT UNABLE TO PRINT AS CHIP GIVEN IS NOT ACCEPTED BY PRINTER. TRIED 3 DIFFERENT CHIPS STILL PROBLEM PERSISTS. WHAT MAY BE THE RESEASON AND SOLUTION

Nov 30, 2010 | Ricoh Aficio SP-C210SF Printer

1 Answer

My machine show c 210


Please specify the machine model,in the Ricoh 1035 not exist the C210 error code.
If your machine show CC201=When the paper jam condition is not reset for 10 minutes the code is automatically generated.For reset please enter in the SP mode turn main switch OFF,unplugged and wait 10 sec.Plugged and turn ON the power switch.

Sep 05, 2009 | Ricoh Aficio 1035 Copier

2 Answers

HOW to configure ricoh aficio 2032 on nework and install it on more than 1 pc. this printer is connected via ethernet cable to dlink switch, where my other pcs are conected. but i cant connect it on any...


You install driver for the Aficio 2032 on all computers where you want to be printed from it.
Then you will go to Printer driver properties and then need to be created port TCP/IP and write the address from the printer it's same as connecting a computer on network

Jun 30, 2009 | Ricoh Aficio SP C210 Laser Printer

2 Answers

Ricoh sp c410 yellow toner is offset in prints


Go into the menu that says maintence )I think) and do the color registration.

Jun 24, 2009 | Ricoh Aficio SP C410DN Laser Printer

1 Answer

Ricoh Aficio SP C210 error message


Try loading letter size paper in tray1 .. Open the front door and the assembly attached to the front door is the transfer roller ASM. mybe you knocked it out of position ..There are green plastic clips that allow someone to the transfer roller unit so its easy to mess up good luck

Apr 20, 2009 | Ricoh Aficio SP C210 Laser Printer

1 Answer

Color bad on ricoh aficio sp c210 sf


Hi There,

print out a page from windows paint program of cyan, magenta, and yellow. see which colors are incorrect. that will help you get closer to the problem area.

the drum also may not be screwed in all the way. remove it, and try putting it back in again.

Dec 12, 2008 | Ricoh Aficio Colour 3006 Color Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

fares

Level 1 Expert

67 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...