Microsft word what is the process of changing the way letters, numbers, punctuationmarks, and symbols appear on thescreen and in print

Hi,

I'm afraid your question is a bit ambiguous.

Do you want to change the fount or their size?

Turn it off and on it should go thru it's dance and rehome the print wheel. f you are notin KBII , language mode or the print wheel damaged the homing pawl for the P/W is probably broken you need a tech.

DickyO

The software that came with the printer will have a "setup" or "settings" icon. You can change it there.

If you can't find it or never installed it you can delete the printer software and re-install it and you can start from scratch with the new information you want.

goto control panel click it,.... goto Add or Remove user Accounts click it,...

drop down appears, asks for permission to continue or tells you you are not high enough on food chain --I have a vista operating program- ask for adminstrators password...

click... goto main User Accounts Page
click...change password

use a password that has at least six symbols,,,a capital letter,,,,some lower case letters,,some numbers,, adds up to six symbols ... ex.. Job226

If it is 2 vertical lines the printwheel has a bent or broken spoke.

DickyO

I can't login page won't come up all I get is numbers letters and symbols.

This sounds like a corrupt print driver. Try uninstalling and reinstalling the driver.

there is a feature on your computer to switch between "insert" which inserts words at the point of your cursor, without being destructive to other text, and "overwrite" mode, which replaces current words/text with what you type. in Microsoft Word or other word processing programs, you can see a small symbol representing either "INS or OVR" in the bottom status bar. to switch between these modes, press the "Insert" key on your keyboard (also labeled "Ins" on some keyboards), this toggles the insert/overwrite mode back and forth.
Good luck!