After conect my thomson X3030E once to a stereo via USB port my navigation keys don´t work any more. Record and back keys who are on the top don´t work either. It only work by the touch area but i have a problem, when a press select to listen a song, i can´t stop it by pressing back key (only thing i can do is press select again to pause it or switch off the thomson X3030E).Can you tell me what is the problem?

no you cant conect it with usb u can conect it via HDMI or VGA

Did you sort out this problem? I just brought one and it's not working either. I've got all the system requirements it says I need and have tried to charge it for 5 hours (it says at least 3) and it won't do anything.

If i m not wrong, ur phone's OS is Windows mobile 6.5 and if u have downloaded latest version of Microsoft Active Sync then ur phone should be recognized as soon as u connect it.
Try to uninstall/update the Activesync first. then connect ur phone via USB cable (make sure the phone powered off).

after cable is connected , turn the phone on and see if it gets recognized.

I do not know the particulars of the CTS, but most USB´s will recognize the music files and folders only, but will not operate the iphone remotely unless the software needed is loaded. IPODs are designed so you can record music unto them, but you can not extract it, record from it, just listen to it, so probably, Iphones operate the same way.

Hello!

I see many comp. with problem on front usb port. In some case USB port isn´t right plug in motherboard, or is everything OK but they don´t recognize USB stick.
Only one, don´t lose you time with that, don´t use that USB port.

Battery in mouse???? and set up disk???

Sir,

Better u have to try for once Yahoo Messanger.
Then tell me. Will guide u

Cheers
Jaggu

I believe the Brisbane SD48 radio can only recognize memory cards up to 2 GB. Your SDHC memory cards probably exceed this 2 GB limit.

Ijust bought a archos 5 250gb , conected via usb and drag some music from pc to archos . A few hours late the archos stopped, the pc don´t recognize the archos .
I pressed the on/off and vol together and formated the aarchos .
now had been disaster , the display just appeared the ARCOS Entertainement you way . the pc don´t regognizer the ARCHOS, NOTHING APPEARED .

Well, The first thing you should do is to try to test of the print server is properly connecting to the printer. Check the linksys printserver manual and look for how to print a status sheel from the print server. Once done, get the IP address of the print server. Go to your laptop and navigate to control panel/printer. See if you have the driver installed or download the Vista Drivers from Epson.com/support. During the installation, it will ask you what connection type your computer uses. cancel out of the installation or choose LPT1 as the port. Once done, go back to control panel/printers.Right click the R220 icon and navigate to properties. Select ports after that and add a new port. Select Standard TCP IP port after that. Once done, the wizard will appear. Input the IP address of the printer and finish the wizard. you should be good to go after this.