Question about Office Equipment & Supplies

1 Answer

EpsonStylus DX84000 Multifunction printer bought in UK and used in UK. Prints only first third of a page Thank you in hope Mrs Claudia Logan

Posted by on

  • claudiazjtt May 14, 2009

    All is now fine. Thank you.
    Mrs C Logan

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

If you are able to print out a copy directly on the multifunction( a picture or document in the scanner and then copy ) without the use of the computer. Then the problem is with your computer and not with the printer.

This is mostly caused by a problem with the computers drivers.

First open printers and faxes

  1. click start
  2. select printers and faxes, if you don't see it there, then click on control panel
  3. on control panel, on the left side click on classic view. you can skip this step if you already see all the icons
  4. open printers and faxes or just printers
  5. right click on your printer and select delete
  6. repeat the step 5 if you have the printer more than ones.
Uninstall the current drivers and software

  1. click start
  2. click control panel
  3. double click add or remove programs
  4. find epson drivers and other epson products and click on uninstall
  5. close the add or remove programs when you have removed all the epson related software.

unplug the printer from your computer.

restart the computer, and use the cd that came with the printer or download the drivers and software from EPSON PRINTER DRIVERS AND SUPPORT PAGE if you don't have the cd anymore.

Plug in the printer when asked or when drivers and software is installed, You may need to restart the computer.

The printer should print normally from the computer again.

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica minolta 4695 prints only grayscale


replace all image unit not using third party also check control panel settinigs for printer might be default to gray scale

Jan 03, 2014 | Konica Minolta Magicolor 4690MF...

1 Answer

Printer prints rubbish but test page is correct


Power off printer. and unplug USB cable, Go to control panel and uninstall all related software.reboot PC.
Go to printer Manufacture website and download latest version of software.
install software. do not plug in the printer until told to do so.


Hope this helps

Mar 01, 2013 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Vertical lines


Lines in prints with this machine would suggest a fault with a drum unit. As each toner cartridge contains its own drum unit it is likely to be a particular colour at fault. If the colour is not immediately obvious, I would recommend printing off a test page like the one here:
http://www.refreshcartridges.co.uk/igloo/colour-laser-printer-test-page/

Nov 19, 2012 | Canon Imageclass Mf-8350cdn Color Laser...

1 Answer

How do I exchange print cartridges in my EpsonStylus RX 6000?


Here is a link to a the instruction manual for your printer, the section you need starts at page 15:

EpsonStylus RX 6000 Product Manual


I hope this solves your question. Have a great day!

Mike

Apr 06, 2011 | Office Equipment & Supplies

1 Answer

My Kodak esp 3200 won't print labels on Avery label pages. WILL print the labels on regular copy paper. Any suggestions on what to do?


I am having the same problem except you didn't address the problem. It's not that the printer prints badly, jams or crashes. The printer literally passes the label paper through the printer and then prints on the next piece of copy paper. I reset my printer not to print the last page first and it still did it. Then I put the label paper second in the feeder. It passed through the first piece of copy paper and the
labels and printed on the third. It's like the printer senses the thicker paper and skips it. My printer is a Kodak ESP C315 and I have no setting for thick paper only plain and photopapers.

Sep 22, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Epsonstylus CX7800- when printing color


well you must use the correct ink, you use a very thin ink, that´s way it´s bleeds, the ink is very metal corrosive, and destoy al mec. parts and bunsout the print head. NOTE:you have ruined your printer, the repair is very expensive.

Jan 13, 2010 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Epsonstylus C62 prints gibberish when turned on.


How can I fix my HP J5750 printer that prints gibberish with a compatable HP PC.

Dec 25, 2008 | Office Equipment & Supplies

2 Answers

MFC 215 BROTHER MULTIFUNCTION PRINTER


reseat / reclamp cartidges then perform printhead cleaning

Sep 07, 2008 | Brother MFC 210C All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...