Question about Thermador DWU244 Dishwasher

2 Answers

Solution for Thermado DW245ub dishwasher

Solution for ''Our Thermador DW245ub runs for 3 to 4 hours is this normal. I notice another owner has the same problem.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A repairman once told me that if I ran the hot water in my sink til it was hot, it would cut down on the time the machine took to "heat" the water and shorten the cycle a bit. It still takes a long time though.

Posted on Jun 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,632 Answers

You don't have enough hot water coming into the didhwasher. The element is coming on to heat the water. Are you using the sanitizing cycle? Vitally

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher takes 3 hours to run through programme


3 hours isn't "extremely" long. If you run a normal cycle, it should run about 2-2:30 hours normally with the drying cycle. Now if it's over 3 hours, that would be a problem. Make sure that when you open the door that there is a lot of steam coming out, because that is the only thing that can extend the cycle is if the dishwasher isn't heating the water. Unfortunately this is a very common issue and it means that your control board inside the door has failed. There is a relay on the board that shorts out. This relay sends power to the heater, so when it fails the dishwasher doesn't wash well and it will run forever trying to heat the water which will never happen.

Sep 10, 2013 | Bosch Dishwashers

1 Answer

Is it possible that when I set the dishwasher to normal or automatic, the cycle takes over two hours!! I think it was 136 minutes. MUCH longer than any other dishwasher I've ever had


Hi,
Yes, many dishwashers now will take at least two hours and some more depending on various things that ti checks as it is washing...
With the newer detergents and cooler water temps. the cycles are getting longer...to do the same job...

heatman101

Mar 07, 2011 | Thermador 24 in. DWHD94BP Built-in...

1 Answer

Dishwasher runs about 3 hours


First check the inlet water flow into the machine. There is a strainer attached to this. If it is clogged water filling into the machine will be delayed!

Also check whether using the same wash program as you were doing earlier. There can not be any other fault aprt from this. i presume the wash quality is good.

Heance clean all the water inlet and outlet for free flow.

Jul 08, 2010 | Siemens 24 in. SE25A091 Hi-Line...

1 Answer

The dishwasher keeps running, doesn't finish cycle, doesn't drain. What can I do to fix it. Put a load in and it ran for over 2 hours. I had to manually stop it. (push off button)


uou must replace the module control. some of those control are covered under the recall at bosch.call bosch or go to thermador .com they are the same company. hope this helps.

Mar 12, 2010 | Bosch 23 in. SHU33A Built-In Dishwasher

1 Answer

Cannot reset time delay


you can call thermador or go to thermador .com and get the owners manual or get the # and call then and they will tell you what to press and hold to take time delay off. if you have the owner manual it will tell you how totake it off. let me know if i was helpful with a 4 thumbs up . the themador company bosch, gaggenau,seimens they all are the same company.

Feb 27, 2010 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS


common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere.

Mar 22, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Thermador dishwasher DWU244, error code "F" does not run?


f code is a fill fault problem to much or to little water to determine the problem is to hit cancel drain buttons on the front of the machine and wait for cl on the display turn off machine and wait 30 seconds turn back on and the first thing you will hear is the drain motor turn on for 15 sec then you should hear the water filling into the machine if you dont hear water filing then check to see if the valve under the sink is open to allow water to fill machine

Feb 15, 2009 | Thermador DWU244 Dishwasher

2 Answers

Dishwasher runs for 3 hours


Are you using the high wash temp setting? I was having the same problem with my dishwasher while using that setting. Apparently, it will run until the temp gets to its required number. And my hot water heater was set to not go that far. So my dishwasher would run and run. I fixed it by not using that setting any more.

Aug 14, 2008 | Frigidaire 24 in. FDB1050REC Stainless...

Not finding what you are looking for?
Thermador DWU244 Dishwasher Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermador Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Brad Brown

Level 3 Expert

15557 Answers

ray gallant

Level 3 Expert

43006 Answers

Are you a Thermador Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...