Question about RTO 9002 TrimWalk Trim Walk Folding Manual Treadmill

2 Answers

I need help adjusting the belt on the trimwalk manual treadmill

I need help adjusting the belt on the trimwalk manual folding treadmill, please help!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My new phoenix manual folding treadmill does not have enough friction - how tight should the belt be? I feel like I will slip off the back now.

Posted on Mar 19, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 83 Answers

To tighten the belt, start by locating the two bolts that adjust the rear roller (one on each side of the unit in the back). Run the unit at about 3 mph. Tighten the bolts a 1/4 turn at a time. Make sure that what you do to one side, you MUST do to the other side or the belt will get off center. After you tighten it 1/4 turn, check the belt to see if it is still slipping. If it is then tighten the belt 1/4 turn again. Continue until the belt does not slip, but do not tighten the bolts more than 2 full turns.

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 5.op Smooth folding treadmill that I bought in 2002 and has worked perfectly until now. the walking belt has frayed on the right side and now has a cut in it. I've tried to readjust the


Step 1:

Please adjust acordinbg the Video.God bless you

Step 2:

see the next video how to loube and rollers bearing too.

Step 3:

if you need to replace the deck belt please go to
www.fitnessrepairparts.com

Jan 07, 2013 | Smoothfitness Exercise & Fitness

1 Answer

Proform sports 1000 treadmill how to adjust the drive belt


HI,
Watch the following video to adjust the treadmill belt. All the treadmill's uses the same way.


Oct 09, 2011 | Proform Sport 1000 Folding Treadmill...

1 Answer

I have noticed a few times that my f3 life fitness treadmill changes pace on me, and so does the incline. i can see it on the monitor, also it has started feeling like the belt is catching or something, or...


It might just need a simple adjustment of the running belt that can eliminate the slipping refer to you owner's manual for the procedure. It will be close to all treadmill adjustments.
Here is a generic procedure for adjusting the belt:
If the walking belt slips when walked on. Run the treadmill @ 3 to 4 mph, walk for a few minutes, Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. Then repeat adjusting procedure until walking belt is properly tightened.

Jul 18, 2010 | Life Fitness F3 Folding Treadmill with...

1 Answer

How to do you adjust the belt on a Pro form crosswalk 380? The belt is getting loose and I lost the manual.


To adjust the belt: Less Belt Tension: turn both adjustment bolts on back of treadmill in a counter-clockwise direction. More Belt Tension: Turn both adjustment bolts equally in a clockwise direction. Center Adjustment (moves belt center to the left): Turn left-side adjustment bolt counter-clockwise. Center Adjustment (moves belt center to the right): Turn the left-side adjustment bolt clockwise.
An over tightened walking belt can raise the amp draw of your treadmill, contribute to seam separation on the walking belt, or both, so do not over tighten the walking belt.
You should be able to lift the belt in the center on the side by approximately 2” to 3”, if you cannot lift it by 2” to 3”, the belt is too tight.

Feb 20, 2010 | Proform 730 Folding Treadmill Model...

1 Answer

My treadmill belt keeps slipping when i put my weight on it. It is second hand with no manuel,I have had it 6 months and it only started slipping this last 7 days.


more than likely the drive belt needs to be tightened. This is done by removing the lower cover. Should be 2 screws in the rear and 2 screws on the bottom to remove it. Then there is an adjustable bracket on the motor. Hope this helps, Tim
also a pdf manual can be found on iconservice.com for free download.

Nov 10, 2009 | Proform Sport 1000 Folding Treadmill...

1 Answer

Walking belt folds


It sounds like one of the adjusted bolts or endcaps that adjusts the walk belt is broken,look at the bolts where you adjust and see if the side the belt is shifting to is broken.It may have ruined the belt also but you wont be able to tell till you correct the tracking problem.

Jul 18, 2009 | Proform Sport 1000 Folding Treadmill...

1 Answer

Manual Treadmills vs. Motorized Treadmills


Treadmills come in two basic varieties, just like lawnmowers: manual and motorized. But, unlike a lawnmower, you will generally get a better workout from a motorized treadmill. Manual Treadmills - Getting Going On a manual treadmill, the action of your feet against the deck moves the belt. Pros * You provide all of the motive power and exercise your lower body. Cons * It can be difficult to get the belt moving intially. That straining against the belt can stress your joints. * You may have to raise the incline of the treadmill significantly to make it easy enough to get the belt moving. * Once the belt is moving, however, you would have to stop and get off to change the incline, so you are stuck with one incline level during each workout. Motorized Treadmill Advantages * The belt is moved by the motor, you don't have to strain to start it. * On many treadmills, you can adjust the speed and incline while you are still walking or running. On others, you may have to get off and adjust the incline manually, but you just have to turn on the treadmill to start the belt again. Manual Treadmills - Speed With a manual treadmill, you go only as fast as you push yourself. If you slow, it slows. If you stop, it stops. Motorized Treadmill Speed and Workouts The speed is adjustable and many motorized treadmills have workout programs that adjust the speed to give you a varied workout. This pushes you to go faster. The constantly moving belt of a motorized treadmill motivates you to keep up. Costs Manual treadmills are relatively inexpensive, in the $100-200 US range. Motorized treadmills for home use cost from $750-$5000, and generally the more you pay, the better you get. Most motorized treadmills under $1000 have underpowered motors and are less sturdy and have fewer options for adjusting the incline, programmed workouts, etc.

Dec 01, 2008 | Endurance TF3i Folding Treadmill

Not finding what you are looking for?
RTO 9002 TrimWalk Trim Walk Folding Manual Treadmill Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Exercise & Fitness Experts

Jim London
Jim London

Level 2 Expert

257 Answers

Christian Samuelsen
Christian Samuelsen

Level 1 Expert

77 Answers

yadayada
yadayada

Level 3 Expert

75222 Answers

Are you a RTO Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...