Question about Kenmore Front Load Washer

1 Answer

Door locks, but will not fill up with water. Alarm sounds and lights flash once every minute or so

Kenmore 41744052400 super capacity front loader washer. When starting the washer on any cycle the door will lock, but no water starts filling the waser. In about a minute it gives a beep alarm and all 4 lights about the cancel button will flash once

Posted by on

  • Marc Gardner May 12, 2009

    I did some more fiddling aroundand I need to clarify some things. The washer has run fine for about 4 years. The user manual was next to useless. I was able to get a more specific error code out of it though. Once the first beep alram goes off. I can press and hold down start and cancel at the same time. Doe this for a few seconds and all 5 lights above cancel as well as the light above start light up. Then the lights shut off and the light above start blinks 3 times. Where can I find out what thos blinking lights mean?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is a rectangular magnet attached on the inside of the drawer for the detergent. Located on the right hand side near the front of the drawer. This magnet had come loose. Some glue and caulking worked well and the washer is working fine now. Meant to post this weeks ago.

Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights keep flashing and door locks without finishing cycle


Kenmore HE2 Plus Front Load Washer Keeps unlocking ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?

Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...

Washing machines - Ariston



Jan 05, 2016 | Washing Machines

1 Answer

My kenmore he2 front loader is not going threw the wash cycle, but all the lights come on and the door is locked what could be wrong?


Hum may have a bad water pressure switch? It detirmines when the wash cycle should start according to the water level. if bad it will not signal the appliance to start washing. Also may want to check ur door lock switch if its bad it wont go into wash either.

Sep 19, 2014 | Kenmore HE2 Plus 3.6 cu. ft. Super...

1 Answer

Kenmore front loader washing machine won't start


You will need to replace the door lock. Here is the part to order.
To replace the lock, remove the band securing the boot to the front panel and fold back the door boot. Now you can access and replace the lock. Let me know if you should need further help.

Nov 05, 2012 | Washing Machines

1 Answer

Have a front loader kenmore model # 41744052400 washing machine


Ours doesn't even spin. I'm trying to connect with a repair guy.
If we gets our repaired, I'll try to remember to get back to this page.
Good luck with yours.

Apr 07, 2010 | Kenmore Washing Machines

1 Answer

Kenmore super capacity 3.5 washer won't begin washing


Same thing is happening with mine, what did you do to fix it?

Jun 24, 2009 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

Won't fill w/ water, Kenmore 3.5 Super Capacity Front Loader


The pressure switch is likely to blame. Change it.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 28, 2009 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

Kenmore Super Capacity front loading washer that has stopped.


Hello SMCCRAVE,
You are referring to a top loader problem.
A front loader is different the following is from the youtube page that has video explaining the possible issues!

Washing machine not spinning? This video provides information on how to troubleshoot a front-load washer that won't spin and the most likely defective parts associated with this problem. These are sorted from most likely to least likely to be the issue.

Commonly replaced washer parts:
Drive belt
Door lock switch
Motor control board
Stator/rotor
Drive motor
Good Luck!
Rich Lilja

May 21, 2017 | Kenmore 46462 Front Load Washer

1 Answer

Door lock


Check for loose wires in the door lock; or replace door lock.

Dec 02, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Kenmore Front Load Washer Logo

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2667 Answers

fordexpert

Level 3 Expert

5613 Answers

Robert Rankin

Level 2 Expert

356 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...