Question about Zyxel P660HW-D1 Router

1 Answer

Problem while configuring my router.

Yeah so first of. Login in to it is like a epic battle. Its a 30/70_% that im allowed to log in to it via the browser with the standard password. (and i found out I had to reset the router each time i try for some reason. )

Anyway. When i get in and finaly get to change one of the settings, and am about to change the next, it goes to a white screen that says something like----- Object Protected------ Then after that i cant log in anymore. (only when i restart my computer and play the 30/70% battle,)

Then I have to start all over. And ive had no problem with it before. SO whats wrong and how can i fix it.

Posted by on

  • iwolfi May 15, 2009

    yeah but the download link in there dosnt work. So ive been searching the net for another link. But same broken link.



    Thx for the efford anyway.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 115 Answers

U need to upgrade the firmware of the router,,go to the website of the router manufacturer and look for updated firmware of the router,download it on the computer where the router is hardwired with..open up the router page and upload it and flash the firmware,,best of luck

Posted on May 13, 2009

  • Abhisek Das May 15, 2009

    call up the manufacturer {tech support}and ask them where to find it,,,they are bound to help u..i mean the link....

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock


Just pull the power out to reboot the router. Also note some routers are configured to only allow you to log into them when you are wired into one of the lan ports on the router, not wireless. It's a security feature.

Jul 07, 2013 | D-Link DIR-615 Wireless Router

1 Answer

D-Link Dir-615 do not connect via wifi


Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).

ip.jpg

Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .

admin.jpg


  • How do I find my routers IP Address, in Windows XP?
  • How do I reset my router back to the factory default settings?

    (NOTE: To reach the configuration page of your D-Link router in Mac OS, you will need to use a Java compatible browser such as Firefox or Camino.)

    (NOTE: Some routers have a "Captcha" graphical login option. This option can be disabled in the advanced options of the routers configuration.)

  • Nov 20, 2010 | D-Link DIR-615 Wireless Router

    1 Answer

    Belkin N Modem Router F5D8636 Im having a problem with internet connection via this particular model. I get connected to the internet for about 2 hrs then it will be disconnected to the internet. However...


    this is because, your ISP may refresh the ip address assigned to you for every 2 hrs.... usually belkin will understand the change of ip address and act accordingly...in you case it is not.... you can log in to router by typing 192.168.2.1 (login password: no password....leave blank and click submit...) clicking on restore factory defaults and reconfiguring the router will fix this issue... if it still didnot, then follow this link below and download the updated firmware for your router version (v1 or v2)....
    http://tinyurl.com/33c37x4
    once you updated the firmware, click on restore factory defaults and configure the router for your ISP....
    Call 1800-2-belkin(235546) for technical assistance to configure your router...

    Apr 26, 2010 | Belkin N Wireless Modem-Router F5D8633au4A

    1 Answer

    I want to use the router for remote viewing of cameras. How do I do port forwarding???


    login to the router configuration page (typically 192.168.1.1) For username/password the username can sometimes be blank, other times it's 'admin', and the password is typically 'admin'.
    Once you've logged in there will be a page that allows you to configure port forwarding.
    You may want to get a copy of the manual, which will be available from the d-link support website.

    Apr 19, 2010 | D-Link AirPlus DI-524 Wireless Router

    1 Answer

    My router wont let me into its site


    Press and hold the Reset button on the rear of the Router for 30 seconds to reset it to the default settings.
    Then, use the IP address of the router to access its interface to log on.

    Dec 01, 2009 | Arris Wireless G Broadband Router (wr850g)

    1 Answer

    Problem trying to change the settings in my P-2602R-D1A router.


    You may want to try updating your routers firmware, it seems like it's gotten scrambled. Here is a link for your routers firmware, click the 'Download' next to 'Description'

    http://www.findmysoft.com/drivers/ZyXEL-P-2602RL-D1A-3-40-ADP-1-C0-340ADP1C0-firmware-driver.html

    May 12, 2009 | Zyxel P660HW-D1 Router

    3 Answers

    Configuring DLink Wifi router for Reliance broadband


    quick questions

    1. how did you setup your modem?..is it via PPPoA or PPPoE
    2. can you please provide the model number of your modem

    thanks


    Apr 24, 2008 | Linksys Wireless-G Broadband Router

    1 Answer

    Belkin F5D8233-4 router & I pod touch wifi


    What I would try is while the wifi is unsecure go on the computer and open up the browser you are using, on your router the default ip address is 192.168.2.1moz-screenshot.jpg

    type the router default ip address in the browser where you would normally type a web address www.google.com

    Logging into the Router
    You will see the Router’s home page in your browser window. The home page is visible to any user who wants to see it. To make any changes to the Router’s settings, you have to log in. Clicking the
    “Login” button or clicking on any one of the links on the home page will take you to the login screen. The Router ships with no password entered. In the login screen, leave the password blank and click the
    “Submit” button to log in.
    Configuring the Wireless Network Settings
    The “Wireless” tab lets you make changes to the wireless network settings. From this tab you can make changes to the wireless network name or Service Set Identifier (SSID), operating channel, encryption security settings, and configure the Router to be used as an access point.
    Setting up an Allow Access List
    1. Select the “Allow” radio button (1) to begin setting up a list of
    computers allowed to connect to the wireless network.
    2. Next, in the “MAC Address” field that is blank (3), type in the
    MAC address of the wireless computer you want to be able to
    access the wireless network, then click “<<Add” (4).
    3. Continue to do this until all of the computers you want to add
    have been entered.
    4. Click “Apply Changes” (5) to finish.

    this will allow only the wireless device you select to access your router.

    Mar 06, 2008 | Belkin (F5D7230-4) Router (587009)

    1 Answer

    Belking router trouble


    Hello Wolter, Are you losing sync with your ISP or are you just not routing. Plus are you connected via DSL or Cable? These are important questions. In any event you might be experiencing line issues. Try this: log into your router write down the configuration information (for DSL: login and password to your ISP) press and hold the reset button on your router until it resets (all lights Blink) then reconnect and reconfig your login and password to your ISP BTW the router will revert to the default entry ID and password. Once the router is reset and the configuration has been restored try to use it.

    Sep 12, 2007 | Belkin (F5D7231-4) Wireless Router

    Not finding what you are looking for?
    Zyxel P660HW-D1 Router Logo

    Related Topics:

    451 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zyxel Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    mark

    Level 2 Expert

    107 Answers

    Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...