Zanussi ZBF360 Electric Single Oven Logo

Related Topics:

A
Anonymous Posted on Dec 09, 2013

Zanussi single oven

Had power cut,now oven wont heat up

1 Related Answer

barkencoa

Barry Coates

  • 3463 Answers
  • Posted on Dec 13, 2008

SOURCE: main oven wont work

It is the oven element that has failed
Remove panel at rear of oven compartment, there you will see the element, just undo any screws that you can see and pull the element towards you, carefully detach the wires, but don't loose them inside or you will have remove the oven to get the wires back on.
Fit new element and Bob's your uncle ,you've cracked it.
Plz leave feedback for this solution.
Thanks.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Using grill and everything tripped now grill or oven wont work

Electric grill most often uses heater element to heat up.Maybe your heater elemen is shorted to oven body thus tripping the safety device.
Check your grill system using insulation tester.If the insulation is low check the heater elemen insulation and if defective replace them.
2helpful
1answer

Oven won't turn on, had a power outage on the street 3 times today. Tried flipping the fuse, but nothing has happened. Any suggestions? Not sure which model Zanussi it is, except it is not brand new!!

The electronic clock/timer must be in manual mode for the oven to operate. When the power to the oven is cut the electronic clock/timer reverts to automatic mode when the power comes back on.
1helpful
1answer

The fan comes on but the oven does not heat up

You need to replace the oven element, this is located at the rear of the oven compartment behind a removeable cover.
A very easy job to do.
Make sure power is off before doing anything.
0helpful
1answer

My oven wont come on and i know there is a problem with the electronic programmer, can i reset it or not use it at all

If you cannot reset the oven timer, then it will not heat the oven.
This being the case, then it is possible in some cases to bypass the timer, or the alternative is to to replace the timer.
2helpful
1answer

ZBF360X Electric Single Oven: fan oven working but no heat...

Hello,

If the main oven fan is working but no heat it is most probably the ring element which is around the fan blade inside the oven.Check it is the element before you go and replace because there could also be an issue with the thermostat.Hope this helps.

Good Luck,
0helpful
1answer

How do I replace the inner door of my zanussi ZBQ365X oven?

open the oven door and there are screws around the perimeter of the inner door cover remove these the seal then replace the glass and reverse the procedure make sure the heat seal gets put back right for the heat shield
0helpful
2answers

Fan not heating

  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Zanussi manual.
  2. If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped like us on facebook please

How to Video Tutorials on Domestic Appliances

1helpful
1answer

Zanussi zbf260x built-in oven keeps tripping out

Probably due to a fault on the oven heating element. Check continuity and earth with a multimeter if you can but it's odds on you will need a new heating element.
1helpful
1answer

Zanussi oven wont work. clock flashing 'auto'

you need to set clock before oven will work. do you still have instruction book as it will tell you there how to do it
0helpful
2answers

Zanussi zbf 760 (9 yrs old now)

This tutorial will show you how to check your Zanussi element and how to replace your Zanussi cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Zanussi manual.
  2. If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped like us on facebook please
How to Video Tutorials on Domestic Appliances How to Video Tutorials on Domestic Appliances
Not finding what you are looking for?

40 views

Ask a Question

Usually answered in minutes!

Top Zanussi Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

Are you a Zanussi Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...