Question about Hitachi 43FWX20B 43" Rear Projection Television

1 Answer

Blue and yellow curb on top of my 43" hitachi

Blue and yellow curb on top rest of screen is ok and you can still see thru the blue line

Posted by on

  • Anonymous Nov 02, 2007

    I have the same blue and yellow colour issues with my model. There is distortion around the images on the screen? The shadows on the picture are displaced. Please email me any possible solutions when you get your response.



    Thank you

    Adam Groleau



    adamgroleau21@hotmail.com

  • billings4 Jun 10, 2008

    i have the same problem but on the top of my screen is a blue arch shape.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hitachi 60sdx88ba UltraVision Digital Projection TV @ the top of the screen a yellow swoosh 6 inches wide with a blue line 8 inches under it. On the right bottam a 3 appears. Double image on the...


You have a defect in the convergence circuit. Both chips will need replaced and possibly a resistor or two. Chip part numbers are STK392-110. Typical repair runs around $350

Bill W
integrityhomeworx.com

Mar 20, 2011 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Color is fine but in top right corner have blue and yellow distortion but the rest of the screen picture is ok


The tv have a problems known as a convergence problems,it dead.Any colors lines R,G,B mis alignment anywhere in the picture screen.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.

Oct 09, 2010 | Hitachi 60DX10B 60" Rear Projection...

1 Answer

Pink and green lines running through my hitachi tv?


i have a hitachi projection tv and im getting blue lines behind the lettering and on different spots of the screen can anyone help

May 12, 2009 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Hitachi TV 43FDX10B has yellow line with blue curve line above it


It sounds like your convergence ic's are messing up

They have a kit for this tv it is available through local parts distributors
If you can't find it locally just Google HITACHI CONVERGENCE KIT

If you are not good with de-soldering and soldering do not attempt this repair. Remember to replace all the resistors in the kit

If you are not sure about doing this repair you should have your local tv guy do it for you

Jan 27, 2009 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Blue doesn't seem to line up


Blue convergence IC is bad....change both,,,original number
Stk392-110 replace with upgrade Stk394-160E Hitachi part
# CZ 01341 ....also check B+ feed resistors for over-heating
................................T.

Jan 27, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Blue shadow


Needs convergence circuit repair = replace convergence IC's,
then activate Magic Focus...............need step by step?......T.

Nov 30, 2007 | Hitachi 43F300 43" Rear Projection...

Not finding what you are looking for?
Hitachi 43FWX20B 43" Rear Projection Television Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75591 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...