Question about RCA P61960 61" Rear Projection Television

1 Answer

Picture too big for screen

My picture seems bowed. It is perfectly clear in the central portion of the screen but as you go out towards the edges, everything is blurry and the convergence is off. I have adjusted the green, blue and red convergence from the menu. It seems as if the picture is zoomed or way too big for the screen.

Posted by on

  • 3 more comments 
  • Anonymous Nov 22, 2007

    the picture is too big for the screen. The picture bows out. Gets blurry as you move away from the center.

  • Anonymous Jan 29, 2008

    my picture is too big for the tv i got

  • Anonymous Feb 24, 2008

    I've had my tv for 4 years and just today i was watching a vhs movie when the scren went black and when it came back the picture seemed zoomed in making the picture to big for te screen. This seems to be a comon problem with no solution.

  • rich7887 Mar 22, 2008

    I've adjusted the convergence from the menu but it didn't work

  • gilles-emond Aug 17, 2008

    picture is to big for screen and bends on the outside of each side of screen



1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If anyone has this p61960 television that does not work anymore, I am looking for parts for mine and would buy, please let me know, thanks

Posted on Mar 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 52" RCA P52937SG screen

the part is called the convergence ic. replace those ics.

Mar 22, 2011 | RCA 32F531T 32" TV

2 Answers

Picture is bowed and colors are not aligned

This called Projection TV convergence. Take a look on this site for a tip on Projection TV convergence.

Apr 19, 2010 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

3d picture and looks like bow tie

Bad STK ICs replace both ICs will have part number on them STK392-110s if this is what you have upgrade to 150s! ICs are Big black ICs also ck 2.7 ohm resistors near ics.

Sep 16, 2009 | Samsung HCM4215W 42" Rear Projection...

2 Answers

I have a 52' big screen and the picture is shoing

Ur convergence is dead,go to buy the convergence repair kit.Find out ur make and models,and manufactures of ur TV buy it.
All big projection DLP have this prob. one time or other every manufactures,Sony,Samsung,RCA,many others.

Aug 26, 2009 | Televison & Video

1 Answer

Bowed picture and color misalignment

Replace both STKS ICs Ck low ohm resistors 2.7ohms most of the time there will be 2 of them bad.

Jun 11, 2009 | Samsung HCN5527W 55" Rear Projection...

1 Answer

Green convergance wont adjust, bowed screen

Green really shouldn't be adjusted, you adjust red and blue to the green. When a color is bowed that indicates that a part or two are bad, probably the convergence output IC's and possibly a fuse or fusible resister. You may need a tech to come adjust it for you because after replacing IC's the adjustments should be done in the servicers menus not just in the consumers menus.

Mar 13, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

Pt-47wx49e convergence problem

I just replaced the 2 convergance chips, but it did not seem to fix the problem. I then tested all the resistors that feed the convergence chips anf there was a 2.2 ohm fusable blown. IT was R7050 on mine. That seemed to fix it so that I could adjust all the colors through the convergence 2 screen. There seems to be a slight bow near the bottom when you look at the c2 screen, but not noticable when you are watching a picture. Since I got this broken, I am not sure how perfect it should be.

If anyone can send me the service manual, I would appretiate it. Thanks.

Oct 10, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Sides of screen do not show properly

dloads- first of all is your picture clear,it seems as if your tv is a little out of focus . Look on the back of your tv there may be a focus adjust.If not your focus adjust is inside on the flyback transformer,if you want to try to set itlet me know and I'll walk you through it. cooltek Feb29/08

Feb 29, 2008 | Sanyo DS24205 24" TV

Not finding what you are looking for?
RCA P61960 61" Rear Projection Television Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers


Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides