Re: IT WILL NOT TURN ON AND WE TRIED NEW BATTERIES AND...
If it won't power on, this likely indicates that your motherboard is fried and needs to be replaced. Have you tried connecting to a wall charger? If you connect it to a wall charger and it STILL doesn't power on, then your motherboard is fried for sure.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Always charge batteries before using it for the first time, or if you have not used it for a long period. 3 months is a very long period.
Always charge sets of batteries (2 or 4) together.
Make sure your rechargeable batteries are all good. One defect in a set is killing for the whole set
Don't use barrettes from different sets or brands together.
I had one brand good NiMH batteries and a very expensive charger from the same brand. The charger destroyed all my rechargeable (more than 60 now). When I first discovered the batteries were dropping out, I stopped using the charger, but it did not prevent all batteries to die in the following months. Every time on dropped out I had to change the set. I tried using up the others by grouping the ones with the same Ri, but not longer then a few months and I had a box full to trow away.
Never use a quick charger, capable of charging them within an hour or faster. Us a charger that indicates the Ri is still low enough, so you can see what batteries are bad.
Check you are using a charger for NiMH batteries.
I would try another set (new) because buying Alkaline is also not cheap.
I used 2700 mAh and later 2600 mAh rechargeable, all dead now. since a few weeks I'm now using 2300 mHh from another brand, costing 1/5 of the "best" I had before, and they are doing great. I won't charge them with the quick charger.
Never use manganese (Zinc-Carbon) batteries in electronic devices.
These batteries are only to be used in flash lights.
I have similar issue. The batteries were left in the camera for more than a month. After battery recharge it worked for few snaps and stopped working while taking a snap. After that I tried charging battery but it seems to not work anymore. I suspect battery is dead. I have ordered new batteries, lets see if that makes it work.
Hi, luckily with the Sleep Sheep, the internal circuitry is easy to get to by removing some screws. Does the sheep turn on at all? Does it start and then stop? Do any of the sounds work, at any volume levels?
I have the same problem with my pro-79 scanner. The adapter from my Uniden cordless phone works on my scanner, but then the phone won''t work.
I have rechargeable batteries but they don't stay charged very long in the scanner. I know this didn't solve your problem but thought I would let you know about the cordless phone adapter.