No Driver Just bought new. Can't open Driver on CD. Have Windows XP. Does this even work with XP or do I need Vista?

you are most likely getting a BSOD with a stop error code of 0x0000007B which is caused by the Windows XP CD that you are using doesn't have the SATA Hard Drive controller driver needed to recognize and utilize the hard drive. If Lenovo has XP drivers for this model then they should have a SATA driver (roughly 394k) that will need to be loaded FROM A FLOPPY DISKETTE during the boot to XP. (XP Requires the driver to either be slipstreamed into the CD or loaded from a floppy diskette. Trying to load the controller driver USB or a different CD will not work)
http://www.digitgeek.com/how-to-slipstream-sata-drivers-into-xp-cd/

Hi,
You can download the driver from the manufacturer's website by clicking this link
On the page which opens, select the operating system (Windows Vista / Windows Vista x64,etc..) of your computer to download the appropriate drivers and software.
Hope this solves your problem. Thanks for using FixYa.

I suggest emailing lexmark and telling them u need a disc for a Lexmark X2550 printer. Maybe tell em yours didnt come with one when u bought it and be firm...or you can continue to try and download it from the internet.

Hi Vostro owner.Dont worry,this can be sorted.Sound issue is not because u installed windows from a Non-dell cd.But i would ask to call up dell because they will provide u the XP disc that should have come with the system or even it is lost from you.Also then we can download the driver from support site : www.support.dell.com and install it.It is just a mere coincidence now.But the reason i'm asking to get cd from Dell is so that u can avoid any future problems with installing XP from a non-dell cd

Chances are that the cd you are using is for windows 2000 or XP.  That cd will not work with vista.  But, you are in luck.  The Oki C3400N is compatible with Vista!  Go to this website and get the windows vista driver for it.  Install it and your printer should work.  Please rate!
http://my.okidata.com/dsdownWeb.nsf/(MOC-C3400n)/FD20231B3C802BE4852572DC005561C3?OpenDocument

I do not know if Windows Vista driver software for the MFC-3240C is available on CD/DVD.

You can download either the Full Driver & Software Package or the Add Printer Driver Wizard for Windows Vista ("regular" edition) from this page.

You can download either the Full Driver & Software Package or the Add Printer Driver Wizard for Windows Vista x64 Edition from this page.

Hi,

It is possible that your hard drive is a SATA and therefore not readily readable by 98, XP but surprised not even by Vista. In any case, since you would still prefer to run XP (due to other software compatibility issues), pls press F6 when prompted by the XP installer. Additionally, you would need to have ready in a floppy the appropriate SATA drivers for your motherboard. They maybe downloaded from the motherboard manufacturer's website or possibly in the installer/driver CD that came with the PC.

Other than the above, it is also possible that you may have some issues with the availability of XP drivers for the other devices for that computer specially if it is branded.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Your Compaq came with Vista installed. Finding drivers for XP Pro with SP2 seem to be very troublesome. Somewhere HP Compaq has these drivers for you laptop. If you call them & they find out you bought XP Pro they will not support you in finding the proper drivers for XP Pro. How ever you can call & ask what it will cost for a recovery CD for XP Pro w/SP2.
Click the link to Compaq & listed is your laptop & what software & drivers are listed. If you need other drivers that are not listed, post what you want I'll try & find them for you. Please be as detailed as possible.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=3641194&lang=en
You may find some here.
http://search.hp.com/query.html?sh=1&charset=UTF-8&la=en&qt=drivers%20for%20XP%20A902TU%20Notebook

If you have a vista capable 98067 ver.1 you will need the vista driver for it located at vista drivers. Even though you are using XP the driver is tied in with the Vista one for your camera. I hope this helps.

The should not be a driver needed  Vista  shoukd simply see a new drive or set the camera/scanner wizard,