Question about Hotpoint RB787 Electric Kitchen Range
We are having a problem wanting to make sure we get the correct part / parts...the stove top (all 4 burners) work fine, however the clock timer, Oven. oven light & all indicator lights do not. It was working fine 2 days ago, then last night, I went to turn on the burnner & the indicatior light flashed.. we have checked the breakers & that was not the problem. we moved ot the stove out took off the back cover & everything started working again... after vacing where the stove sitts, we were going to move it back & then we were back to square one.. we wiggled wires, connection, etc. & nothing.
Thanks in advance for any thoughts
Did this solve the problem I have the same problem
The surface burner light goes on but the burners only get
Posted on Nov 12, 2009
you will need to replace the control board that contains the clock readout,any power surges ruins these electronics instantly,this can be replaced by removing the rear cover on the back of the unit and remove screws securing the electronic module
Posted on Jan 09, 2010
Tips for a great answer:
Apr 17, 2015 | Hotpoint Kitchen Ranges
Hi Ron - From what you have described if neither the burners nor oven turns on make sure the electrical connecting is 240V. The oven light and clock portions only required 115V. The clock and oven light working may indicate an electrical circuit breaker supplying the range is tripped or a fuse is blown. Confirm household circuit is correct and the range cord is properly wired to the terminal block.
Sep 16, 2012 | Frigidaire Gallery GLEFM397DS Electric...
Dec 04, 2010 | Hotpoint RGB745 Gas Kitchen Range
Jan 08, 2010 | Hotpoint RB787 Electric Kitchen Range
Sep 04, 2009 | Hotpoint RGB745 Gas Kitchen Range
Jul 26, 2009 | Hotpoint RB757 Electric Kitchen Range
May 17, 2009 | Hotpoint RB525BC Electric Kitchen Range
Feb 01, 2009 | Stoves 60" VULCAN RANGES GAS(CLICK HERE):...
Feb 14, 2008 | Hotpoint RB757 Electric Kitchen Range
378 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: