Manual do 5.1ch DVD SURROUND SYSTEM AXD7353 - Pioneer 1000 Watt 5.1 Surround Sound System System

But have you tried the manual?

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/LG-LHB335-Home-Theater-Systems-manual/id/23637ci371/t/2/

Any external source will require a digital multichannel signal IN to the LG for surround.

You should be able to run an optical audio cable from the Verizon set-top-box to the optical audio in on the surround sound system

http://bestbuy.partsearch.com/Part/Pioneer+Electronics/Pioneer/AV7733P/Pioneer+Electronics/Pioneer/AXD7353/New.aspx

http://www.encompassparts.com/products/?AXD7353

http://www.dvdremotecontrols.com/Mfrs/Pioneer/PioneerAudio/AXD7353.htm

the last link i think is the cheapest....however bestbuy would be safest in my books :)

I realize this may sound silly but it could be the disc your are playing. Some DVDs are not mixed for surround sound and thoes that are produce very little sound from the rears.

Rear speakers were meant for effect, not meant to distract you from the picture.

Give this a try, get a movie playing that is 5.1 surround sound. Check that the home theatre is not set to stereo mode, if it is change the surround mode on the unit. Now that you are in the middle of an action scene disconnect the front speakers and see if there is background noise comming out of the rears.

If its still dead let me know more details about the system and I will work on a solution.

Cheers,

On page 36 of the Pioneer users manual, it describes how to set your audio for HDMI interconnect. Follow the directions, and hopefully it will work. You can down load the manual from the Pioneer web site. Google "speaker system HTZ171 DVD". Click on the Pioneer site for your system and look for the download on the right side of page.
I hope this was helpful...

If you have surround speakers with a surround system, then connect the Player to the surround system using for example RCA cables (White and Red).

If you have speakers only, connecting many speakers to a non-surround system won't give you surround.
In surround systems the sound is controlled, elaborated and distributed through the speakers by a circuit.

If you wnt surround sound the alternatives are :

1. Connecting a surround system (eg.Home theater, receiver) to the player (amp+speakers)
2. Upgrading the DVD to one with surround.

Let me know if you need more help.

bye.

G.

Hi I have an RCA Truflat TV and a philips Surround sound dvd all in one system and a jvc dish system. I have had my surround working up until my nephews messed with it and hooked up a wii system to it. Now I get no sound on my surround sound and I have tried rearranging the cables but I can not get any sound from the surround sound and for the life of me I can not rember how I originaly had it set up. can you help?

ask manualfox.com - they will get it.

you have to select the correct input on your TV and surround system. for example select HDMI 1 or two on the TV and DVD or what ever input you have it connected to on the surround system.

Read the instruction manuals for more information.

Good luck!

je kan met 2 tulp aansluitingen via de dvd speler audio out naar je tv gaan en dan de instelling aux van de dvd speler gebruiken zo kan je surround tv kijken