Question about Washing Machines

1 Answer

Will not complete a wash cycle or rinse cycle, stops short

Kenmore top load washer will not complete a cycle. Washes unti llast 4 minutes and stops, rinses until last few minutes and then stops.

Posted by on

  • mx457mom May 12, 2009

    110. 915512210

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

I think it maybe your lid switch. If the lid switch is out it will not spin and sometimes spin or drain. can you give me a model number so that I can further assist you?

Posted on May 12, 2009

  • Pataricia Nolte
    Pataricia Nolte May 13, 2009

    That number is not comming up for me. Look under the back of the lid that you put your clothes through and read from the plate located at about 12 o'clock on the washer. I am almost certain that If it does this on all cycles that wash and the stop and then rinse and then stop that it is your lid switch. Does it spin the clothes out when you move the timer to spin?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does a Kenmore washer not finish the cycle?


Washer Repair - Not Advancing -Repair & Diagnostic ...

? 8:30
https://www.youtube.com/watch?v=IEr9A7uhdN8
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Repair your Kenmore Top Load Washer suffering from these following issues: Will Not Advance Past Rinse ...

Kenmore washer doesn't complete final spin cycle - ApplianceBlog

www.applianceblog.com/.../31894-Kenmore-washer-doesn-t-complete-fi...
May 16, 2012 - 9 posts - ‎2 authors hello, my kenmore washer doesn't complete the final spin cycle. i ... Does it stop in the middle of the final spin cycle or does it not go into the ... FIXED Kenmore Washer - Not finishing the spin cycle
9 posts
Dec 20, 2014
FIXED Washing Machine Does Not Complete Cycle ...
10 posts
Mar 14, 2013
FIXED Kenmore washer won't spin out all water from ...
10 posts
Jun 27, 2009
FIXED GE front load washer WCVH6260F0WW stops ...
10 posts
Jul 2, 2007
More results from www.applianceblog.com

Nov 05, 2015 | Kenmore Washing Machines

1 Answer

My washing machine does not complete full cycle it washes and then shuts down at rinse cycle. When advanced over first issue it will complete the cycle.


Your problem is going to get worse, really soon. The DC motor on the bottom of the washer needs to be replaced. The windings inside the motor have shorted together and cause it to draw too much power, shutting down the washer. The motor is expensive, home warranty covered mine.

Oct 08, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Our top load washer washes a couple of loads fine


Sounds like the thermal breaker inside the motor is heating up and triping it resets when it cools either the motor it's self is geting hot or something is causing it to over heat. Just a guess hope this helps

Apr 24, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Kenmore model # 110.244222300, Won't automatically complete wash


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.#######) and you'll see a list of major sub-components with diagrams and parts.

Following is a Whirlpool / Kenmore service manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Initial thoughts are that the Timer is worn / broken.

Here is a description of how to gain access to the console on these washers where you may be able to test the timer. (See the Whirlpool service manual for testing)

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131



Jan 19, 2010 | Kenmore Washing Machines

1 Answer

No cold rinse, only hot


Either the wires have come loose on the water valve or you have a defective water valve.Open the lid and look at the water valve. Are all wires connected?
If yes, replace the water valve.

Jun 24, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

My brandnew ge top-loading washer does not enter into the rinse and spin cycle. it washes drains and spins then stops there.


Check the cold water inlet. Valve on? Hose not kinked? Inlet screen where hose connects to washer not obstructed with debris? If all these check out OK with still no rinse water fill, call for warranty service. (hope you didn't buy from Sears, as product from there does not come with factory warranty !)

Feb 26, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Washer agitates, drains OK, but spin doesn't start


Timer is defective. Your unit has a netural drain. When finished agitating, the shuts down and then starts up reversing to drain and spin. On the initial reverse start, the water drains without the transmission spinning. After a timed period 3-4 minutes, the timer is supposed to pause, stopping the motor for a few seconds. When the motor stops again, the transmission shift to the spin cycle and when the timer resumes power tothe motor it should spin. You are doing the same thing when you lift the lid...stopping the timer and then the tranny shifts and when you set the lid down, the washer spins. Replace the timer.......

Feb 09, 2009 | Kenmore 23822 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...