Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

Does not finish cycle, gives error 20

Washer does not finsh cycle, give error 20

Posted by on

  • dmik May 12, 2009

    same thing - it flashes E20, won't drain, won't go into spin cycle, leaves wather in the washer - I'm learning to hate this machine!

  • Anonymous May 17, 2009

    it flashes E20, won't drain, won't go into spin cycle, leaves wather in the washer - I'm learning to hate this machine!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After reading what others said on how to fix, I followed their suggestion of the coin trap, bingo, it was my problem as well. Thanks great help!

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Front Load Washer won't complete cycle F06


Have you cleaned your machine lately? They make an in wash boost- it gets rid of the extra suds built up inside the machine that you cant see but your machine detects it and causes faults such as that. Also, there is a small wire on the control board that may need replaced if it keeps kicking the error code.

Apr 07, 2016 | Kenmore Elite 45986 Front Load Washer

1 Answer

Hi i came home to find the door light flashing on my machine.the machinr had finshed its cycle but not compleatl


Door is likely open. Open and close it and see if it gives a clicking sound to indicate it is closed.

Apr 01, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

My washer errors on the rinse cycle gives F20error


F-20 clogged drain, to access clean out tip washer back,remove screws from bottom panel5a2ee35.jpg
e3a3d11.jpg190ba97.jpg3386cfa.jpg

Mar 21, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer giving F2 error during wash cycle, cycle doesnt finish


HI. this code represents a Long Drain issue.

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Oct 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My washing machine keeps giving me a error 20 code and dosent finish the cycle


E20 is a general error code to get to the real problem try this..
Reading Error Codes2.gif 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash2.gif. let me know what code come up... hope it helps

Sep 14, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Maytag performance series washer model mhwe500vp stops mid cycle


having the same problem found in side a small black hose with a small hole in it but have no idea what this hose is for. may be it is connected to some water sensor.

Jun 27, 2009 | Maytag Performa PAV2200

1 Answer

Wash cycle has finished still cannot open the door


try unplugging and plugging back in, give it a couple seconds. If this doesn't work, you can remove the front cover reach up and pull the manual door latch.

Jun 19, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer does not finshing washer


i aussume you have cold water,,,washers rinse in cold water.if you have cold water ,,replace the lid switch..part # 285671,,lid switch...onthejob

Jan 23, 2009 | Kenmore Washing Machines

4 Answers

Error codes


f dl refers to a bad door lock. do you hear a faint clicking noise when you try start the machine and after maybe 30 secs of clicking the" fdl "comes up???or perhaps the door makes the noise to lock but never does lock,in which case sounds like a bad latch assy.. although the fault for the door latch it could also be the CCU not energizing the door lock. try taking off the top of the unit by removing the 3 screws along the back of the top assy (they are torx 20 screws) form there youll see the main control board mounted to rear wall and if you look straight down the right front side youll see the wiring for the door lock itself. disconnect power to unit!!!!! first unplug and replug all the wire harness on the door latch and then also the pink wires on the module itself, maybe just a loose connection. try it now see what happens

Mar 17, 2008 | Whirlpool GHW9100L Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...