Question about Washing Machines

1 Answer

Water wont spin out but hear buzzing sound

Kenmore washer model number 11020802990 the water wont spin out but casn hear a bussing sound. I already checked the drain nothing is clogged.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

The water pump is spinning but not pumping it out change the water pump.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 1107672267576722 not filling nor washing


sounds like no water coming into washer?if you go to fill it do you hear a buzzing or humming sound?if so bad water valve located in the back where the hoses connect to the washer or the water shut off is off in the house and no water going to the washer.the model number you sent is to long,after the 110 it should have 8 more numbers and that's it.

Jul 12, 2014 | Kenmore 22422 Top Load Washer

1 Answer

Washer filled w water but wont agitate,spin or drain. I hear a humming,buzzing and something smells like it is burning. After several attempts to start in various different cyles it may have tripped...


send the model number.if it's humming it sounds like the motor is bad.where.if it resets after a while and hums again it's the motor.there's an overload in the motor,when it gets to hot it pops and will reset after it cools.

Apr 13, 2011 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Washer will fill with water but will not go into any other cycle- just hear a light buzzing sound-


sounds like you have a bad drive coupling, if it's the coupling you will hear the motor run but it will not agitate or spin but the water will pump out. the couplings cost about $12.00

Nov 19, 2010 | Kenmore Washing Machines

1 Answer

Wont spin and makes a buzzing noise in all cycles.


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.26912691

and you'll see a list of major sub-components with diagrams and parts.


The Kenmore / Whirlpool top load uses a reversing motor to initiate the pump for draining and the transmission to spin.

Since the washer will drain the problem is not in the Lid Switch (which tends to happen quite often with these washers)

The problem does however point to the Neutral Drain Assembly.


This is a Whirlpool PDF on how these washers operate. It has a detailed section on how the transmission works.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Those cams/gears etc. in that assembly keep the washer from spinning until all of the water is pumped out and then go into spin mode.

The buzzing sound that you hear could be the small cams in the assembly trying to connect with the main spin gear.

Ours had basically the same problems.

After looking at the transmission parts list (available on a number of sites) and on the Whirlpool site (Whirlpool makes Kenmore) we noticed that the one of the cams in the neutral assembly which is supposed to have a small spring, didn't on ours when we tore the transmission apart again

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Repair%20Part%20List%20-%20W10114743.pdf

Found the part number for a kit (Whirlpool part number 388253 Neutral Assembly) for $15.00 and replaced the cams and gears.

In order to get the transmission out, you have to remove the cabinet, the fabric dispenser and both agitators. The top agitator uses a plastic 1/2" drive bolt (a 1/2" socket extension works well).

You don't have to remove the drum.

See the following for how to access the transmission.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=137

Lay the machine down (after disconnecting power and hoses, remove the pump (two clips), the motor (two screws hold two clips on the motor), lift and set the motor aside.

Remove two 1/2 inch bolts for the motor mounting plate and three 1/2 inch bolts for the transmission.

Pull the transmission, remove the clutch (there is a spring clip that holds the clutch on the main agitator shaft), remove the 8 screws carefully the transmission holds 14 - 15Oz of oil, remove the clip holding the main spin gear on and check the plastic cams.

If the cam that should have a spring doesn't, or the others look damaged, or the main spin gear is damaged the washer won't go into spin mode.

If that's the problem, install a Neutral drain kit, put everything back together carefully and the problem may be solved.

As an aside, fixing ours cost less than $30 including 80-90 weight gear oil vs. $170 for a new transmission.

Nov 25, 2009 | Kenmore Washing Machines

1 Answer

My kenmore model # 11020802990 stoped spinning a


Check the motor coupling. Remove the cabinet, pump and motor and see if the coupling (designed to break if the transmission or motor jams) is broken. Check the Sears site

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=11020802990

for part number :
pd_0026_110_285753a?$pddetailsth$ #13 on diagram Coupling, motor Number:3364003Substitution:285753A $18.50 In stock Quantity Add To Cart
Manufacturer authorized substitution: 285753A may differ in appearance, but is a functional equivalent to prior parts including 3364003. If it isn't the coupler, it most likely is the motor.

Sep 14, 2009 | Kenmore 24902 Top Load Washer

1 Answer

Series 70 fills wit water stops then makes a slight buzzing sound


The electric motor my have failed or a part called a capacitor could be the problem? The capacitor is part of the starting circuit of the electric motor, if this fails the motor will not start therefore the washing machine won't spin or agitate.

Jun 16, 2009 | Kenmore Washing Machines

1 Answer

Washer wont spin in the spin cycle.Washer was full of water and making a buzzing noise.If you have any suggestions what it might be that would be great. Kenmore 80 series washer about 11 years old.


sounds like the lower bearing on the trans mission shaft is seizing up on you. had a frigedair that did the same thing. i took it apart to replace, but could not buy separate. it only came with a purchase of a new transmission,which ran $175- 275. so i junked it out. washer was only 5 years old.

May 29, 2009 | Kenmore Washing Machines

2 Answers

Kenmore Elite washer pn 8526056 will not spin


yes it shoud rotate freely in hand. Here's a site to go and see all the parts to your washer www.repairclinic.com enter model number and scroll all the way down. Where you see all parts click the red 100 and it will show 100 parts per page. There you can find transmission parts or the whole new unit. Good Luck. And yes you have transmission problems

Apr 02, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

When my washer spins, it sounds like somehting is loose. kenmore 80series , model#11020802990 type111


does it continue to spin and make noise when you open the lid?
could be the drive block.

Mar 30, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Front load kenmore washer model 417 will not enter any wash cycle. It will do the rinse and spin cycle but not a wash


will it fill with water? if not listen by the water hose when you press start to wash and see if you hear a faint buzz/humming sound. If so you need to replace the water inlet valve. cheers

Mar 25, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...