Question about One For All URC-3605 Remote Control

1 Answer

URC-3605B1 need code for insignia tv - One For All URC-3605 Remote Control

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 253 Answers

If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SETUP until the LED blinks twice,
then release SETUP.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for

f you have set up the remote control
using the Searching For Your Code
procedure, you may need to find out
which four-digit code is operating your
equipment:
For example, to find out which code is
operating your TV:
1. On the remote control, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9 - 9 - 0.The LED will
blink twice.
4. To view the code for the first digit,
press 1 once.Wait 3 seconds, count
the LED blinks (e.g., 3 blinks = 3)
and write down the number.
NOTE: If a code digit is “0”, the LED will
not blink.
5. Repeat step 4 three more times for
remaining digits.Use 2 for the
second digit, 3 for the third digit,
and 4 for the fourth digit.
6. To check for codes of other devices,
repeat steps 1 through 5, but substitute
the appropriate device key for
each device you are checking.
As before,write down each fourdigit
code.
http://www.rockabilly.net/files/manuals/URC-3605.pdf is my source for the info
http://www.rockabilly.net/files/manuals/URC-3605-codes.pdf these are the codes, I didn't see insinia in the TV section, so you may have to use the search feature

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I do not have the one for all universal remote control codes for the older insignia flat screen tv


0165 0166 0210 0421 0611. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Mar 20, 2014 | One For All URC-4330 Remote Control

Tip

REMOTE CONTROL CODES FOR THE INSIGNIA TELEVISION MODEL: 42" NS-LCD42HD


This information was found on the insignia website www.insignia-products.com under technical information for the insignia television model :42"1080p NS-LCD42HD. cablevision-ur2-cbl-cv04.gifaligner.gif CableVision UR2-CBL-CV04
code: 096
charter-digital.gifaligner.gif Charter DIGITAL
code: 0463
comcast-m1057.gifaligner.gif Comcast M1057
code: 0463, 10463
cox-cox.gifaligner.gif Cox COX
code: 0463
direct-tv-rc23.gifaligner.gif Direct TV RC23
code: 10463
dish-network-vip508.gifaligner.gif Dish Network VIP508
code: 720
dish-network-vip622.gifaligner.gif Dish Network VIP622
code: 720
motorola-drc800.gifaligner.gif Motorola DRC800
code: 0463
one-for-all-urc-6690.gifaligner.gif One for All URC-6690
code: 0464
phillips-pdvr8.gifaligner.gif Phillips PDVR8
code: 115
phillips-ph5dss.gifaligner.gif Phillips PH5DSS
code: 115
phillips-ph5dvd5.gifaligner.gif Phillips PH5DVD5
code: 115
phillips-pmdvr8.gifaligner.gif Phillips PMDVR8
code: 115
rca-rcu807.gifaligner.gif RCA RCU807
code: 135
sony-rm-vl600.gifaligner.gif Sony RM-VL600
code: 8043
tivo-hd.gifaligner.gif TiVo HD
code: 0091
tivo-series-3.gifaligner.gif TiVo SERIES 3
code: 0091

on May 23, 2009 | Insignia 42" LCD Flat-Panel HDTV

Tip

REMOTE CONTROL CODES FOR THE INSIGNIA TELEVISION MODEL: LCDTY26


This information was found on the www.insignia-products.com website. Under technical information for the insignia television model LCDTV26. cablevision-ur2-cbl-cv04.gifaligner.gif CableVision UR2-CBL-CV04
code: 109, 024, 042, 004, 040, 146, 028, 232, 255, 081, 200
charter-digital.gifaligner.gif Charter DIGITAL
code: 0093, 0150, 0178
comcast-m1057.gifaligner.gif Comcast M1057
code: 0093, 0150, 0178
cox-cox.gifaligner.gif Cox COX
code: 0093, 0150, 0178
direct-tv-rc23.gifaligner.gif Direct TV RC23
code: 11250
motorola-drc800.gifaligner.gif Motorola DRC800
code: 0093, 0150, 0178
one-for-all-urc-6690.gifaligner.gif One for All URC-6690
code: 1250
phillips-pdvr8.gifaligner.gif Phillips PDVR8
code: 102
phillips-ph5dss.gifaligner.gif Phillips PH5DSS
code: 102
phillips-ph5dvd5.gifaligner.gif Phillips PH5DVD5
code: 102
phillips-pmdvr8.gifaligner.gif Phillips PMDVR8
code: 102
rca-rcu807.gifaligner.gif RCA RCU807
code: 005
sony-rm-vl600.gifaligner.gif Sony RM-VL600
code: 8024

on May 23, 2009 | Insignia LCDTV26 26 in. Television

1 Answer

I need the "all for one" remote code for Insignia flat screen.


059176a.jpg

I can help you to program your One For All Big Easy URC-3220 Universal Remote to control your Insignia TV.

22b85d5.jpg

Please review my Fixya Tip posts for:

  1. Searching for the proper codes, or
  2. Downloading the URC-3220 users manual / owners guide. This contains all the codes for the brands of devices your remote can control.
I suggest using the search feature if Insignia is not listed in the code lists. Many manufacturers recycle other brands' codes.

I hope that helps.

Aug 12, 2009 | One For All URC-3021 Remote Control

1 Answer

Need code for urc-6820BOO remote for insignia flat screen tv


Remote control codes for your TV can be found here. Search for your TV model number, then click the Support tab. If your remote isn't listed, try codes for the brands listed in the note at the bottom of the page.

Jun 27, 2009 | One For All URC-3021 Remote Control

2 Answers

URC-4021B00 codes


http://www.oneforall.co.uk/us_US/support

May 21, 2009 | One For All URC-4021 Remote Control

1 Answer

URC 4220 will not operate 14" Insignia TV (NS-14FTV)


need code to set my urc4220 universal control for my zenith tv

Mar 22, 2009 | One For All URC4220 Remote Control

2 Answers

Need codes for remote controll


link for the one for all

insignia try 0103,0189,0217,0135,0133,0116,0167,0456,0029

orion 1479,0479

Mar 10, 2008 | One For All URC-3021 Remote Control

Not finding what you are looking for?
One For All URC-3605 Remote Control Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...