Question about Lands Phones

2 Answers

GREEN LIGHT ON BASE UNIT WON'T STOP FLASHING.

We bought a bt 3100 single handset phone a few months ago and have somehow lost the instructions booklet.Since we got the phone the green light on the base part of the phone has continued to flash. I thought the green light would go off when the phone was charged but it does'nt. What is the green light for a how can we stop it flashing all the time? We are retired and in poor health so we also have a lifeline modem which is for if we have a medical emergency. This is separate from the phone but next to it on the same plug bar, but I have checked with the lifeline call centre and our lifeline is working fine [I was worried that this may be affecting it as they were fitted on the same day.] Please can you suggest what we can do to fix this problem? Thanks sue

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the dial tone is not set to pulse also delete any messages from bt 1571 and the light will stop flashing

Posted on Nov 09, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My phone has the same problem. My phone is not set to pulse and is fully charged, plus I have deleted all my voice-mail messages including saved ones, yet the green light continues to flash.

Posted on Jan 23, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Additional handset on BT Synergy 6500 phone is stuck on 'Test Mode'


is possble to use 8 bt 6500 hand phones via 2 base unit on the one bt line

Feb 28, 2012 | GE 25942GE2 Cordless Phone System

1 Answer

Flashing green light on base unit BT Studio 3500


The flashing green light is the in use indicator on the base. Click the scroll button down on the handset to show the call list, then press the x or secrecy button, then press the tick or menu but to confirm, the call list is now empty and the green light has stopped flashing, You need to repeat this for each handset until complete

Oct 11, 2009 | Dual Lands Phones

2 Answers

Have just bought a second hand BT mango telephone with 2 extra handsets.There doesn't appear to be anywhere to connect the phone wire to handsets 2 and 3. Only a socket for the power supply. Is this right?


There isnt a socket to connect the additional handsets because it is not needed. The handsets all use a single line by connecting to the base unit. You need to make sure the additional handsets are registered to the base unit.

For how to do this and anything else look in the manual which can be downloaded for free at http://phone.manualsonline.com/manuals/mfg/british_communications_bt/bt_mango_1_2.html

Aug 14, 2009 | Uniden Cordless Phone

2 Answers

How to connect additional unit to base unit special code ?


Hello. Here is how you do register your handset below, and a link to the manual its on page 46. The procedure depends on how many handsets you have. If you only had one handset follow the directions below. If you have more than one handset follow the second set.

On the handset push menu, then dial 0 0
On the base, push and hold down the locator/intercom button until the charge light flashes
Press OK on the handset, and it should automatically register in a few seconds.

On the handset push menu, then dial 0 0
On the base, press select until you see the intercom number you wish to register it to. Stop there and push the Call button until the charge light flashes
Push OK on the handset, and it should register

Hope this helps


http://service.us.panasonic.com/OPERMANPDF/KXTG5631.PDF

Feb 28, 2009 | Panasonic KX-TG5632 Phone

3 Answers

BT Studio 3100 handset 1. Display flashing base 1, cannot go to setup menu, not changed pin code, turned off and on, removed batteries, turned off base unit, waited 20-30secs for all of above and still...


Help
My Bt Studio 3100 cordless telephone ( 2 Pack ). I have carried out the setting up procedures as per instructions.
Handset batteries are fully charged, but I am not getting the dialling tone.

Jul 11, 2008 | Lands Phones

4 Answers

BT Studio 1000 4 handsets


To Mrs Sue Groom,
You probably need to register the handsets to the base.This is the user manual for the BT Studio 1500
http://www.shop.bt.com/content/uni2/documentation/43py/023626.pdf

Mar 21, 2008 | Xact Communication XG2200 Cordless Phone

1 Answer

ModelKX-TG6051BSAYS NO LINK TO BASE MOVE CLOSER TO BASE, duh,i have it sitting on base all day,when go to make call it says no link to base.why? I did unplug roommates thought would work.But now cant even...


Your handset has somehow lost its ability to see your base. Try re-registering it to your base. To do so, at the handset push MENU 001 . Then at the base, push and hold down the INTERCOM/LOCATOR button down until the IN USE light begins flashing. Then at the handset push OK, and within a few seconds it should beep and be registered. If first not successful try again. If it still does not work, try de-registering the handset, then repeat the registration procedures I described above. Here is a link to the manual that describes these procedures, look on page 39. http://www2.panasonic.com/consumer-electronics/support/Operating-Instructions/details-KX-TG6051M

Feb 26, 2008 | Lands Phones

4 Answers

BT Freestyle 2200 I am having problems obtaining a dialing tone on both of my handsets. When I press the green button for a line out it just beeps 3 times and cuts off. There is charge in both the...


hi just want to help others as desciption aint complete above

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are registering the new handset.
2. Press and hold the PAGE button on the base for about 10 seconds until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold redial & CALLSd buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the base number is 1, the display shows 65-1 then PIN. which is normally 0000
5. Enter and registration starts. When the handset beeps and returns to standby registration is complete.

Nov 08, 2006 | British Telecom Freestyle 2200 Trio...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

714 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...