Question about Whirlpool WET3300S Top Load Stacked Washer / Dryer

1 Answer

Water not filling on washer

Model:
Whirlpool Thin Twin WET3300SQ model (stackable washer/dryer, about 7yrs old)

I was washing clothes on the weekend, and the water was coming in fine. Then I notice the cloth was more dry than normal at the spin cycle. So, I removed the clothes and put the next load in, this time the water stops coming through. I tried setting it to beginning of cycle or directly to the rinse cycle, and still no water is coming in.

I haven't changed anything since the last wash (which was just 1-2hr ago), and the water is set to Large load, and cold/cold setting.

What could be the problem?

Posted by on

  • mding Jun 08, 2009

    I noticed now that if I set the water lvl switch to (low) or (med). Then the water is coming, but water will not come when it's set to maximum load.

    If I manually let the water starts to come at 'med' and switch it back to maximum load, the water level still only fills to medium.

    Can it be the switch pressure gone bad (W10112533)?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 43 Answers

The inlet filter is probably clogged restricted and/or inhibited flow of water into your machine.
These things happen, and cleaning out the filter is a good first step to finding the problem.

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Overflowing Washing Machine, water does not stop filling, overflows to floor. This is a Whirlpool Thin Twin Stackable


sounds like you have a bad water level pressure switch part 3362987
http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Washer-dryer-combo-Parts/Model-LTE5243DQ6/1198/0152000/W0604125/00001?blt=06&prst=&shdMod=
go her part number 10 in diagram or there could be something in the hose,the hose could have fallen off or could have a hole in it,i can't find a video with a stack machine but this explains your problem
http://www.youtube.com/watch?v=jzKBUI5D0Vs

Mar 30, 2013 | Whirlpool LTE5243DQ Combination...

1 Answer

Whirlpool ite6234d thin twin could someone tell me in detail where the belt is located in the washer?


I can not find your model number that you posted.
I can tell you that all whirpool thin twins up to last year were direct drive with no belt except for the dryer section. Whirlpool stackers from the early eighties did have a washer belt if yours is this old replace the entire machine.

Jun 22, 2017 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

Whirlpool thin twin ylte6234dq2 washer/dryer water overflow!


first access the tech sheet and run any diagnostics it shows for the machine and if this passes,then check/change the fill switch on the control panel along with fill tube from the wash tub base if kinked or plugged

May 10, 2010 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

Whirlpool Thin Twin WET3300SQ (water stops coming in)


  • We are sorry to hear of the problem with your Whirlpool washer. We would recommend having a local certified technician in your area properly diagnose and repair the issue you are experiencing. Please email us at Whirlpool_Digital@Whirlpool.com with your name, phone number, address and the model and serial number for your washer.

Apr 07, 2017 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

Washer fills during spin cycle


Replace the timer, you can find the product name model and serial number on two place. Either the back panel or on the lid underneath. Please rate if this helped thank you

Feb 12, 2009 | Whirlpool LTE5243D Top Load Stacked...

1 Answer

Water fills the washer during spin cycle


defective timer...a model # should be under the lid...or open dryer door and on front dryer panel right hand corner..onthejob

Jan 16, 2009 | Whirlpool LTE5243D Top Load Stacked...

2 Answers

My washer does not work


Sounds like you may have a lid switch problem. Without a model number, I really can give you a part number (Kenmore Stacks are made by two companies, Frigidaire and Whirlpool) or a way to get to it. It is right under the lid. Check the top and be sure that the plunger that goes into the hole isnt broke or missing. If you need further help, send me the model number (will start with 417 if its a Frigidaire or 110 if its a Whirlpool) and will try to get you a little more information. The job on either unit isnt that hard, and parts are pretty inexpensive. Let me know. Jim

Dec 13, 2007 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Whirlpool WET3300S Top Load Stacked Washer / Dryer Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...