Microwave E-NR h564250GB/02 Type SS-5F5K FD0210

Defective door interlock or related wiring

Sounds like a bad keypad. You will need the full model number off the microwave to look up the correct control panel part number. Sometimes these type of parts can be really expensive & it may make more sense to replace the microwave depending on the age and condition.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jeffrey_634abadf963e31e5

see the diagram attached, and fix it. God bless you

1. Light bulbIf your microwave light bulb is not working, perhaps it has blown. The first step is to replace the bulb and power on the microwave. If this does not correct the issue, the next step is to check the socket and wiring to verify if that is the problem.
   
2. Light bulb socket & main control boardIf your microwave light bulb is not working after the installation of a new bulb, check the light socket as well as the wiring to ensure they are properly operating. If these sources are functioning properly, the next step is to check for a faulty control board as a possible root cause to your microwave light bulb malfunction.
   

Assuming the turntable, inside light, and internal cooling fan all work when you press "Start" to cook, then I would suspect a bad magnetron, or a bad connection at the "FA" terminal of the magnetron.

If one or more of those three items do not work when you hit "Start", the I would suspect a bad door switch or mount.

The DCS MO24SS is essentially a rebranded Sharp R-530E-series microwave with different cosmetics and a higher price.

The service manual for the Sharp model is here.

The internal Sharp parts in the manual will interchange, but not the external cosmetic parts.

You can order Sharp parts from Encompass here.

Is this a USA made uint.

Press the off button and hold for 5 seconds if this does not work un plug and it should reset.

Could be a reset or fuse within may just have popped Beware of excessive internal Voltages when servicing...

If all appears to be running as its working but just no heat. Could be issue with magnetron. You could also have loose connections to magnetron or somewhere in high voltaged as well.

We had the same problem, got Neff service engineer to come out after taking out insurance. He said the megatron cracks which is a large magnet and causes the fuse board to blow and needs to be replaced. This occurs through lack of ventilation on instalation. Total cost £370 may as well get a new one. Plus our insurance wouldn't pay the cost and cancelled the insurance policy.

You probably have a stick door switch or broken door switch mount.

If you or someone you know decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information at our site, and our link is at our listing here on FixYa.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.