Question about Kenwood KDC-MP2035 CD Player

2 Answers

I can't figure out how to get the player into mp3 mode. There is the button that changes between CD and tuner, but that doesn't do it.

I can't figure out how to get the player into mp3 mode. There is the button that changes between CD and tuner, but that doesn't do it.

Posted by on

  • Anonymous May 16, 2009

    i have the same problem,,when i have the ipod hooked up an the right corner hole and i press src it does not show me the aux option,,it only has cd, tuner and standby mode ...help..

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Here's what they don't tell you: AUX isn't automatically an option when you scroll through the SRC button. You have to turn it on. I know, I know...stupid. I had to contact Kenwood (the maker of the unit) directly to get an answer.

  • First, press the SRC button repeatedly until it displays STANDBY.
  • Then hold down the Menu button until MENU is displayed.
  • Next press up or down on the right control knob, to scroll up or down, until AUX OFF is displayed.
  • Next hold the right control knob to the left or right until Aux switches on.
  • Now just press the Menu button to exit.
  • AUX will now be an option when you scroll through the SRC button

Posted on Jun 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 655 Answers

Hello pleasant_aff,

The "SRC" button changes the source on the KD-MP2035. Press "SRC" and select "AUX". Your MP3 player should be plugged into the AUX connector to the lower right of the control knob.

Hope this helps.

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get a manual for a Jensen multifunction player tuner wall mount stereo. AWM965


Here you go.

PDF]AWM965 - Jensen RV Direct

https://www.jensenrvdirect.com/.../awm965_owners_manual.pdf
Translate this page
Features. Features of the Jensen AWM965 mobile audio system include: ... Mounting the Radio. Route power ... Press the MUTE button (3) to silence the audio output in tuner, CD, DVD, USB or auxiliary input mode. ... your portable CD / MP3 / iPod or other media player) into the AUX A/V IN (AUX 2 IN) ... Manual Tuning.
manual for Jensen multifunction player tuner wall mount stereo AWM965...

Mar 23, 2017 | Jensen Car Audio & Video

1 Answer

How do you change tuner from local to distance on a Jensen VM9212N?


Press and hold the volume button when the stereo is in tuner mode!

Feb 13, 2015 | Audiovox Jensen Vm9212n 7" Touch/lcd/tv...

1 Answer

I have a eur7711150 remote for a panasonic radio that was my dads.. i cant figure out how to change channels on the radio.. hate to sound so stupid but there doesnt seem to be a tuner or a seek button


The EUR7711150 remote works for several different Panasonic CD stereo systems. To switch between AM and FM, press the Tuner/Band button. (If you were in another mode, you'll need to press the Tuner/Band button once to get to the Tuner mode and then toggle if needed.) Then if you press Play Mode (above Repeat to the left of the number keys), you can toggle between Preset and Manual. In Preset, the rewind and fast forward buttons select between your preset stations. Alternatively, you can set the presets to numerical values and touch the appropriate number button. (Touch the >=10 button first to access Memories 10-15.) If you are on Manual, the rewind and fast forward buttons will let you move up and down between the frequencies. Pressing and holding Rewind or Fast Forward for a moment will let the radio scan to the next frequency in that direction with a signal.

The CD button enables the CD or MP3 disc player mode. AUX and Tape are for external audio devices and cassette tape mode, respectively.

These comments are based on using the remote with the Panasonic SA-PM19. Please add a comment with the specific model of your Panasonic radio if you need additional assistance.

I hope this helps.

Cindy Wells

May 05, 2013 | Televison & Video

1 Answer

How do change the tune to aux mode


Hi,

Look for the SRC (Source) button.

This button allows you to select the input modes, e.g. Tuner, CD, AUX.

Cheers,

Oct 02, 2011 | Kenwood KDC-135 CD Player

2 Answers

My Emerson stereo MS9903TTC won't turn on. It was working fine last night and this morning when I push the power button nothing happens. I tried selecting different modes, (cd, tape, phono, tuner) but no...


I had the same problem the power button is pushed in. You did not mention if your unit came with a remote control if it did use that to turn your stero on and off. you will not be albe to use any of the buttons on the stereo if the controls are listed on the remote IE; Cd player, radio tape or tuner. try this please. hope this helps

Feb 10, 2010 | Emerson Audio Players & Recorders

1 Answer

The MOD button selects only between Tuner and AUX. No CD or USB.


these should switch over automatically when cd/usb is inserted if not there could be a fault

May 07, 2009 | Car Audio & Video

1 Answer

Did you get your fm tuner to work?


Switch the USB Mode in your settings menu away from the mode it is in now, and try again.

Dec 18, 2008 | SanDisk Sansa Clip MP3 Player

1 Answer

Mp3 to aux input


Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.

Oct 31, 2007 | Kenwood Sirius KDC-MP522 CD Player

1 Answer

VRCD400-SDU


Hi Theaternut,

 

Best guess is that your source button or whichever button changes from cd, to Tuner, to usb, to Card, is shorted, and needs cleaning.  Its like the button is always pushed.

 

see if you can carefully dsiassembly the reciever to get to the circuit board behind the button I speak of, and clean it.

Oct 19, 2007 | Jensen 100W x 4 Amplifier KA5 Car Audio...

Not finding what you are looking for?
Kenwood KDC-MP2035 CD Player Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4844 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...