I have a NEFF front load washer/dryer. The washing programme doesn't start. The anti-crease button is flashing and the number 3 with a flashing light appears in the LED display. Can anyone offer advice?
This may be a simple control fault that can be reset by unplugging for 5 minutes or switching the breaker switch off for five minutes also. if the five minute reset doesn't restore the machine to its original operational value, you will then need to replace the main control board in this unit. it has failed.
I have a Neff V4380 washer dryer, it has suddenly stopped. It will pump the water in and out. If you...
(More)
I have a Neff V4380 washer dryer, it has suddenly stopped. It will pump the water in and out. If you press the start button it it just fills, I can hear a clicking but the drum doesn't aggitate, then it just stops. I've checked the belt and cleaned the filter. I also unplugged it for 30 mins and tried again, just does the same.
our neff v4380 drum isn't turning anymore. The programs still work, but no turning of the drum, so...
(More)
our neff v4380 drum isn't turning anymore. The programs still work, but no turning of the drum, so the program halts. Regards, Maarten
Machine flooded my flat. Perhaps through over-filling. Once all water drained
and clothes taken...
(More)
Machine flooded my flat. Perhaps through over-filling. Once all water drained
and clothes taken out. Tried to test it when i press start it says E 01 and is making
a rumbling noise