Question about Panasonic DMR-E85H DVD Recorder

1 Answer

Message on machine constantly says "please wait". It will not turn off unless unplugged.

Message says please wait. Machine will not turn off unless unplugged.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

This machine has problems with the power supply board that can cause a continuous please wait on system check or please wait triggered by trying to dub to DVD-R. The first problem is likely to occur with the older power supply boards and the DVD dub problem on the later boards. The bad capacitor problem was on the earlier power supply boards. The following link is to the solution for this http://www.fixya.com/support/t216825-dvd_recorder_frozen_please_wait_display The later power boards have a voltage regulator problem and the fix for this is at http://www.rbjtech.net/electrical/e85/e85.htm#0 You will notice from the photos that the early and later boards look different so it's easy to see which one you have. I replaced the voltage regulator in my machine and it now works like new.

Posted on Jun 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox workcentre 5745 network controller boots to 75% then fails and the reboot message comes up.


Try the following:
1. Power down the device
2. AFTER it is COMPLETELY powered off (can take up to 2 minutes), unplug the power cord from the wall.
3. Wait 5 minutes with the machine unplugged.
4. AFTER 5 FULL minutes have expired, plug the machine back in and turn it back on.

If this fails to restore functionality please call for service.

Apr 03, 2014 | Xerox 5665 Copier

1 Answer

How to fix error message 8


DISPLAY SHOWS MALFUNCTION 8 Solution: Turn off and unplug machine. Wait a minute. Turn machine on and wait until it stops making any noise. Now try to pull out the drawer. If this does not work, try the procedure again. If this does not work, call customer service
Regards Kat (please leave feedback, many thanks)

Aug 19, 2011 | Jura Capresso Impressa E8 Espresso/Coffee...

1 Answer

I get the following error message from C5180 printer: 0xc18a0001. What should I do?



Hi there
0xc18a0001.
Try the following steps to remove HP Printer Error Code 0xc18a0001.
I have put 3 ways for you to try.

1. Without turning off the printer, unplug the USB cable.
2. Remove the cartridges.
3. Wait until the message "Insert cartridge" appears.
4. Unplug the power cord.
5. Wait 60 seconds.
6. Reconnect the power cable. If the printer does not turn on automatically, press "On button".
7. Reinsert the cartridges and close the lid.
8. If the printer has a page of calibration accept.
9. Reconnect the USB cable and remake an impression.
10. If the problem persists, the machine must be repaired.

Or try 2

Turn the printer and wait until you receive the error message.
* Simultaneously press the keys "9" and "#" printer.
* While holding the button down, unplug the power cord from the unit.
* Wait a few seconds.
* Still holding the button down, reconnect the cable and turn on the printer.
* Release the buttons.

Or try 3

* Turn the printer and wait until you receive the error message.
* Simultaneously press the keys "9" and "#" printer.
* While holding the button down, unplug the power cord from the unit.
* Wait a few seconds.
* Still holding the button down, reconnect the cable and turn on the printer.
* Release the buttons.

Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Mar 01, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

HP Photosmart C6280 printer won't print and displays Ink System Failure message and Error #0xc18a0001.



Hi there
0xc18a0001.
Try the following steps to remove HP Printer Error Code 0xc18a0001.
I have put 3 ways for you to try.

1. Without turning off the printer, unplug the USB cable.
2. Remove the cartridges.
3. Wait until the message "Insert cartridge" appears.
4. Unplug the power cord.
5. Wait 60 seconds.
6. Reconnect the power cable. If the printer does not turn on automatically, press "On button".
7. Reinsert the cartridges and close the lid.
8. If the printer has a page of calibration accept.
9. Reconnect the USB cable and remake an impression.
10. If the problem persists, the machine must be repaired.

Or try 2

Turn the printer and wait until you receive the error message.
* Simultaneously press the keys "9" and "#" printer.
* While holding the button down, unplug the power cord from the unit.
* Wait a few seconds.
* Still holding the button down, reconnect the cable and turn on the printer.
* Release the buttons.

Or try 3

* Turn the printer and wait until you receive the error message.
* Simultaneously press the keys "9" and "#" printer.
* While holding the button down, unplug the power cord from the unit.
* Wait a few seconds.
* Still holding the button down, reconnect the cable and turn on the printer.
* Release the buttons.

Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Feb 10, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Frozen


Unplug the device, wait for 30 seconds, and plug it back in to see if it resets the device. Make sure you wait the full 30 seconds.

Oct 11, 2009 | GE (WMM317440) Answering Machine

1 Answer

Getting ''Fill Water'' message even though Tank is full


Gently remove tank the slide it back in place make sure the back of tank makes good contact with the machine when it is being lowered so that the reed switch can read the magnet in the tank.

Feb 03, 2009 | Saeco 00034 Incanto Sirius Super Automatic...

3 Answers

Answering machine not picking up phnone messages


I think that you can reset the system to factory settings by unplugging all power cords and waiting ten minutes, try this out.

Dec 16, 2008 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Ariston washing machine front loader model number BS1400 error message f-05 stops program and wont spin have unscrewed plug at bottom of machine to drain and started fine after that working for a little...


You could check the pump, open and drain, clear anything out of the pump, next turn off and unplug the mains cable, wait 40 secs and connect mains and turn back on.

Apr 11, 2008 | Washing Machines

1 Answer

Ink cartridge (not) installed properly


unplug machine from power outlet. take all carts out. wait 5 min. plug machine to power. wait until machine demands carts. reinsert carts and make sure they are secured. answer display when asked if you have changed.

If you still have the error message use a original brother cart.

Dec 16, 2007 | Brother MFC 210C All-In-One InkJet Printer

Not finding what you are looking for?
Panasonic DMR-E85H DVD Recorder Logo

Related Topics:

540 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...