- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
NTLDR is short for NT loader – a program loaded from
the hard drive boot sector that displays the Microsoft Windows NT
startup menu and helps Microsoft Windows NT load. So when it goes
missing for some reason, your windows cannot load. Cause:
1. Computer is booting from a non-bootable source.
2. Computer hard disk drive is not properly setup in BIOS.
3. Corrupt NTLDR and/or NTDETECT.COM file.
4. Misconfiguration with the boot.ini file.
5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
6. New hard disk drive being added.
7. Corrupt boot sector / master boot record.
8. Seriously corrupted version of Windows 2000 or Windows XP.
9. Loose or Faulty IDE/EIDE hard disk drive cable. if there is attached drive ,remove the drive first before restarting the system if not then if you had access to another computer, copy the NTLDR and
NTDETECT.COM which is available from the recovery CD which comes with
computer. If you do not have the recovery CD, its available on microsoft site or is available from another computer using
the same Operating System (Windows XP ). The location may be
use a bootable disc to restart the computer
(the Win XP bootable CD or Win 98 bootable CD worked).
After entering MS DOS mode, copy these 2 files to the C drive in
the proper location. After restart, then pressing F10 on start up (used
for system recovery ), then start the repair of Windows via system recovery This will reinstalled all Windows drivers
and system files, while preserving all data on your computer.
You need to download all the drivers installer files from manufacturer website first, and also all the software you want to install automatically with Windows. Then you build a Windows Xp boot CD with all the software setup embedded.
First insert your cd in the cd/dvd drive and then simply restart the computer and it will boot automatically. If it does not boot automatically then go to boot menu and select cd/dvd to the first in the booting order. It will then boot automatically.
There's nothing like the Linux MBR File. The option to boot to multiple operating systems is controlled by a software called as the "Boot-Loader". Windows XP and Linux both have their versions of boot-loaders. The Bootloader that Windows XP uses is called the NTLDR, whereas Linux provides many bootloaders (prominent among them being "Grub" and "LILO").
>but Linux is shown in the manage option from the My Computer in Win XP 2..... That is the control section of NTLDR. So from what I understand you shouldn't have a problem selecting the operating systems.
If you want the Linux bootloader taking control of the boot process, you can always install it. All you need is a Linux CD and then run the setup for "Grub" or "LILO".
Information about installing Grub or LILO can be found easily on the internet.
1. Windows Xp installation disk 2. Access to PC with working CD Cd-ROM DVD drive. 3. This file solution.rar
This guide is for people with basic knowledge of PC hardware and system software Let's start.
1. Download solution.rar file 2. Unpack solution.rar file on drive C, you should have a folder named C:\Dos 3. Put your pendrive ( at least 1GB) into working PC USB port 4. Go to the folder C:\Dos and run HpUSBformat.exe file - it should auto detect wyour pendrive disk, if not select form the list ( my pendrive is a drive G: ) - set other options like on the image below and click start.
- now you have a pendrive with bootable dos on it. 5. Copy all other files from C:/Dos to your pendrive. ( you can overwrite existing ones) - your pendrive should look like that
6. Put your Windows Xp installation disk into Cdrom and copy all files from CD to pendrive.