Question about Sony DVP-CX995V Multi-disc DVD Player

1 Answer

Labeling DVD by using the load function

I loaded 140 DVD's into the unit and typed most of the titles into the edit fuction for each DVD. I had a power failure for over 10 hrs and I losted all my input. Does the unit have a internal power source for this protection.

Posted by on

  • Anonymous May 19, 2008

    Even momentary outages do the same thing. Design flaw that makes the unit far less useful unless you also use a UPS.


    I am go to rip my dvds and go to Apple TV.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

No it doesn't. If you lose power for more than a few minutes, you'll lose everything. It does, however, have an external keyboard capability, which will cut down your input time from a few weeks to a few days. I'm being sarcastic, but I'm very disappointed in this product. In addition to the archaic way it reads and enters disc information, it won't play several DVDs. We get 'unabel to read disc' errors on many movies (new out of the box), and on many more, the unit will actually power off by itself when it tries to read the disc. This is an inferior product that should have never been released. Your best bet is to document a problem and return it for a refund if possible. Our warranty is out, and the best we could get from Sony was a replacement offer for an identical refurbished unit for $273...I don't think so. Run away from this product as fast as you can.

Posted on Dec 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I DOWN LOAD DRIVERS FOR A LIGHT SCRIBE DVD WRITE ABLE /CD RW DRIVE. MODEL # GSA-H3OL


Hi...

If your LG LightScribe drive will not need drivers to work as a 'normal' DVD drive as this function is Plug n' Play.

BTW - You have a great drive there... I have GSA E10L and a GSA E40L - Both fantastic drives...

However to use LightScribe you will need both:

1: LightScribe System Software
and
2: LightScribe Labeling Software.

You can download the System Software here:
http://lightscribesoftware.org/lightscribesystemsoftware/

And FREE LightScribe Labelng Software here:
http://lightscribesoftware.org/freesoftware/windows/

Happy Scribing...

Steve

Sep 29, 2015 | Computers & Internet

Tip

How to Burn Videos to DVD on Mac?


Aimersoft DVD Creator for Mac can help you make DVDs on Mac OS X. Now you can burn your downloaded movies, self-made videos, and digital picture slideshow to DVD disc, DVD Folder, ISO or even DVDMedia. Here is a quick step-by-step guide to get you started.

First, free download, install and launch Mac DVD Creator (Intel Version), choose “Create a New Project” and then follow these 4 steps:

Step 1. Load Files (pictures, photos, slideshows, videos, movies……)
Click the “+” button and select the target files you wish to burn, or just drag files to the program. Then the loaded files will be shown in thumbnail in the file list.
9482b93.jpg
Tip: You can merge, split or re-arrange them by dragging freely according to your preference. And you can also manage your files with the 4 buttons (add, delete, down, up).

Step 2. Edit Files (Optional)
Edit function is available to both videos and slideshows. Highlight a file and click “Edit” to enter the edit interface.
22c4ae6.jpg
Tip: You can edit video and movie files - crop, multiple trim, adjust effects, add watermarks and rotate functions.
83b383d.jpg
Tip: You can edit picture slideshow files - set the transition effects, add text and background music to make them more personalized and eye-catching.

Step 3. Customize DVD menu (Optional)
Click the “Menu” button on the lower right bottom of the main interface to enter the menu editing window. Choose a pre-set dynamic template or static templates. Advanced Setting for customizing is allowed.
For animated template, you can freely change the title miniature and the background music by clicking the “Advanced Setting” button. And free to download more animated DVD templates.
For static template, you can customize the frame, the play button, the video name, the background picture and music of the DVD menu.
77959eb.jpg


Step 4. Start to burn
Aimersoft DVD Creator for Mac provides four output choices: DVD Disc, ISO file, DVD Folder (Video_TS) and DVDMedia file. Choose an output format according your own needs and set proper output parameters to start burning your files.
3b6a7a8.jpg
Note: if you don’t want to burn your files immediately, just save them as a project file, which can be reloaded next time for further editing and burning.

Done!! Enjoy the videos on your big screen DVD player now!

on Jun 02, 2010 | Computers & Internet

1 Answer

How to get unit to play without remote


You can probably use the front panel buttons (STOP PLAY OPEN/CLOSE etc) manually, the only thing you cannot do without the remote is access certain DVD menus, including subtitles/language/special features etc. You can always obtain and use a universal remote for basic menu functions later on if necessary.

To play a DVD movie without the remote, simply load your preferred disc, wait for the player to finish reading its contents, then to skip copyright warnings and/or the 'play movie' menu screen, press STOP, then PLAY, or simply press PLAY button where 'play movie' (or whatever function) is highlighted in the menu. These buttons should be on the front of the main unit. Doing this should encourage the player to detect the appropriate title (the movie) and play it (basic playback operation may not be possible with some DVD releases due to the numerous interactive menus and title pages, such as film trailers).

If basic manual operation is not completely possible with some DVD titles, consider a universal remote for your player if you have either lost your original, or the player was purchased/received without one. Such remotes are relatively inexpensive to purchase, and are available just about everywhere.

Apr 22, 2011 | Panasonic Televison & Video

1 Answer

HOW DO I TYPE NAMES OF CD OR DVD ?


You can't add a title to a disc from a player (such as this). You can only add a title on a disc writer before finishing the disc. (The only exception is RW (rewritable) disc which can be unfinished.) If a title (disc, chapter or track) is on the disc you can display it. Press Title on the remote. If you want to read all of the information on any disc, insert the disc and press Load on the player (when in Stop mode) or press the TV/DiscExplorer/DVD button to set the unit in Disc Explorer mode. It takes about 30 seconds to load the data. Press Stop to cancel the data search. Then use the folder buttons (ALL,DVD,CD,A,B,C,D) on the remote or the player to read the various items. Press Return to leave the folders. If you enter the Disc Explorer while playing a disc, the playback will stop and you will have to press Play to restart (Resume is not an available option).

Once loaded the player will store the data even after you remove the disc. It will clear when a new disc is inserted or you press Load.

The manual for this unit is available at: http://esupport.sony.com/US/perl/model-documents.pl?mdl=DVPCX850D .

I hope this helps.

Cindy Wells

Oct 12, 2010 | Sony DVP-CX850D DVD Player

1 Answer

I've never used an MP3 player before. I bought


Sync to your windows media player....Labeling Unkown Songs: open Windows Media Player and go to libary click on artist. The sub folders will be named by the artists and the unknown songs will be in the sub that say's unknown. Click on unknown then right click on the title bar click Choose Columns put a check next to Genre, Rating, artist and album artist whatever you want. Right click song under artist and edit same with album artist or both and type in the name of the artist etc.... This change in your computers Music folders also then syc with your media player then load songs to it........Or drag and drop

Apr 07, 2010 | Coby MP300 MP3 Player

3 Answers

The magnavox zc320mw8 will not finalize a dvd for playback on anther dvd player


Try this. Insert DVD. Press SETUP button. Once DVD has loaded the DISK FINALIZE option will be available. You can then FINALIZE.

Jun 24, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Cd/dvd burner for labeling


Yes, Ahead Nero. You can download the trial version here. once you see how the labeling software is quite well suited you can go back to the nero.com online store and just download the serial number for $69.99 Otherwise, the retail package is $99.99

I've used Nero for years now and I don't upgrade each and every time a new version comes out.

Nero is a do all software package, you can create and edit videos for DVD, copy disk to disk, etc. etc.

If you want only a labeling software program you want to buy Sure Thing CD/DVD Labeler for $29.99 available from most stores like Office Depot and Staples. You can find it online too at NewEgg.com for example.

Hope this fixes you up and appreciate your rating.
Worldvet

Jun 04, 2008 | Computers & Internet

1 Answer

Lightscribe CD Burner


try and reinstall the sonic program if you have it. it sounds like the computer did not have the sonic software on it when you bought it, so it would have been removed when you restored your computer.

Nov 18, 2007 | HP DVD 740VI 16X16 Dual Layer LightScribe...

3 Answers

How to finalize


i have spent 2 months looking for this answer myself... and at last success! i downloaded the user manual from funai(they made this model) available here: http://www.funai-corp.com/6pdf/om/MWR10D6.pdf on page 38 it instructs you to press setup on your remote, from the drop down menu you need to select disc edit and then select finalize. this aggravated me at first because nothing happens when i hit the setup button, i powered off the unit and hit setup before the disc loaded. this step is not mentioned but is necesary. you cannot finalize a disc after it has loaded to the title menu.

Jul 25, 2007 | Philips Magnavox MWR10D6 DVD Recorder

Not finding what you are looking for?
Sony DVP-CX995V Multi-disc DVD Player Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...