Question about NorStar Meridian M7310 Phone

1 Answer

Call conferencing I have a Meridian Norstar M7324 telephone and I know how to do a call conference. However, if I am the one to call 2 other parties to start a call conference and then I want to hang up to allow the other 2 parties to chat, how do I do this? I know how to hang up if at least 1 partie has been the one to call me but I am unaware of how to hang up if I am the one to call out to both parties? I am unable to find the proper product name for my type of phone and that is why it is different from what I have written in this detail box.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Posted on May 12, 2009

  • ynotphone
    ynotphone May 13, 2009

    There is one small thing about this unsupervised conference call, after you dial Feature 70 (Transfer) this holds 2 of your trunks for the duration of this call.

    Explaination - if you have 4 telephone lines on your system, 2 of these lines are being used for the whole duration of the conference call, even though you are not involved in the meeting anymore.



    Meaning that if the conference call is long distance, after you back out of the call, you still incur the long distance charges.

    All you are doing is transfering the call to each other via your telephone lines.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is audio conferencing and what are it's benefits?


Well, audio conferencing is a medium through which a group of people residing in different parts of the world can communicate easily with each other. It assists in minimizing the expenditure on unnecessary travel for a small meeting for discussion. It is chosen for its reliability, affordability, simplicity and other conveniences.
Communication between partners, customers, employees, and stakeholders become easier and the business can grow manifolds. While a telephone call connects you to only one person, audio conferencing can connect numerous people in just one conference call. And the process is not complex either. It's as easy as making a normal telephone call.
Reliance Mindbridge is one of the best service providers that offers audio conferencing. There is no reservation required by the company from its users to make audio calls. Their service can be used from anywhere and at any time. It is operational in more than ninety countries with faster and free access. The best part is that the conferences can start without the host too. You can call up any number in 230 countries anywhere in the world.
In short, you will get multiple benefits when you take the services from Reliance Mindbridge. They know what the best audio conferencing is all about.
For more details visit: https://www.reliancemindbridge.com/

Aug 27, 2016 | Nokia Cell Phones

1 Answer

When I press memory buttons on one particular telephone in our office they all dial reception. How do I fix this?


PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR


Jan 18, 2016 | NorStar M7324 Telephone

1 Answer

We have Meridian M7324 phones. They are on pulse dialing and need to switch back to touchtone signal.


And did the system default back to 2 lines? It probably lost programming, which will require a system technician or a very good end user to reprogram the whole thing.

Have fun.

Carl

Aug 21, 2009 | NorStar M7324 Telephone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

2 Answers

T7316e Nortel Meridian Norstar Telephone MANUAL


Not too sure what type of manual you are looking for, but here is a useful link to have for a Norstar system information.

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

Mar 24, 2009 | NorStar Lands Phones

1 Answer

Conference call


To make a Conference Call
1. While on a call, press Cnf/Trn_____.
2. Dial a [DN] (or access an outside line and
dial an external telephone number).
3. Press Cnf/Trn after the called party answers.
All parties are conferenced together.
If you added an outside line to the call, press
Cnf/Trn again before hanging up to allow
the outside parties to continue talking. (If
you do not, the call is disconnected).
Note Some types of outside lines
(“unsupervised”) do not automatically
disconnect when conferenced parties
hang up. In this case, press one of the
flashing buttons to monitor the
conference.
If the parties are still on the line, press Cnf/Trn
+ Spkr, then hang up. When no one is
on the line, press Spkr to disconnect the
lines.

Mar 19, 2009 | Toshiba DKT-2020 Corded Phone

1 Answer

Feature 71


If you have a manual, look up RECALL or FLASH or LINK. Specifically Feature 70 and FEAT 71. In your spare button set, you probaly have gray buttons labeled CONF/TRANS and LINK. Now you use them depends on how you are transferring calls. Are you on Centrex or do you have 3 way Conference calling from the telco? That's the one where you can establish a 3 way call and hang up and the other two parties stay connected. If you have that, you'll use the LINK button to get second dial tone, dial your number, and press LINK again to establish a 3-way. LINK time is defaulted at 600 mS, and is adjusted in A 4. Misc programming under LINK. You may just have 3-way calling, and that means the middle party has to stay on the call.

If you don't have 3-way conferencing, you can use the system to conference (using two lines), and the CONF/TRANS button. There may be some disconnect supervision (ie DS cabinet) issues, Supervised/Unsupervised programmnig changes, and transmission losses in conferencing, so your mileage may vary. Best would be maybe to conference with a VoIP trunk or other lossless facility. Anyway, you put the first call on hold, make the second call, then press CONF and the held line to establish a 3-way. At this point, if you have Disconnect Supervision, you can press conference again and leave the call, or put the call on HOLD to keep it on your phone and the other 2 parties can still talk to each other.

Carl

Jan 27, 2009 | NorStar M7324 Telephone

1 Answer

Feature 71 on my meridian M7324


Feature 71 isa link key. It generates a link signal(also known as hookflash, flash, recall, or tap). it can be programmed on your set by entering feature *3 pressing the button where its to be located and entering in feature 71.
I think thats all to know about a link key, hope that helps.

Jan 27, 2009 | NorStar M7324 Telephone

1 Answer

Merian M7324 display name


you would need to get into the admin programming to change the name, have your system admin person make the change for you.

Jan 02, 2009 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...