Question about Maxtor DiamondMax Plus 6800 (91366U4) 13.6 GB Hard Drive

3 Answers

Jumper Settings I am trying to set up my Maxtor 91366U4 as a slave drive so I can retrieve data. Does anyone know where I can find a diagram with jumper settings?Thanks!Thom

Posted by on

  • SlackerPro Sep 04, 2008

    ok, found the letter codes on the board, but have no idea what they stand for... thanks for the follow-up.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Another place to look is on the circuit board where the jumpers are connected you'll see : MS, CS, CAB, a space and TXD.

Cheers

Posted on Jan 19, 2008

Ad

Remove all jumpers for slave /

Posted on Nov 23, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

It's usually written on the drive itself.  Squint hard! Right by the jumper pins should be some letters.  MS, SL, etc.

Posted on Oct 13, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maxtor hd jumper settings n256 91366u4 primary


MAXTOR: no jumpers --> Master
one jumper --> Slave
two jumpers --> Cable Select

Dec 20, 2010 | Maxtor Hard Drive

1 Answer

I have an old maxtor 2 drive that i'm trying to slave


Hi!

Just follow the jumper settings in the picture diagram below:

960ec26.jpg

I hope it helps..

Thank you for reaching Fixya.

Apr 11, 2010 | Maxtor Hard Drive

1 Answer

Need jumper settings wd800 as Mast. & maxtor Dia.plus as slave??


To use the WD 800 as a master there must be no jumper attached to it.The maxtor has a diagram for the jumper and it MUST be set to slave not cable select.

Mar 24, 2010 | Maxtor DiamondMax Plus 9 160 GB Hard Drive

2 Answers

I want to add another hard drive and need to know how to set the jumpers on my maxtor 90645d3 please help.ty


if you want to boot from this drive, please set the jumper to the master position.

if this drive is for additional storage, please set the jumper to slave. and make sure 1st hard drive is set to master.

if this is the only drive in the system, please set the jumper to single or remove the jumper.

there will be a chart telling you which pins are for which setting in the jumper area, which is between the data plug and the power plug on the back of your HDD.

main thing that will cause drives to not work is 2 jumpers on the same cable and they both are set to the same thng.. i.e. master/master or slave/slave. also, if one is set to single drive it will likely bypass the slave drive.

Jan 25, 2010 | Maxtor Hard Drive

2 Answers

What is the jumper setting for 'Slave' on Maxtor


Look at the picture, I cannot memorize all hardisk jumper but almost all drives have label in it. where you put the jumper for the Cable Select, Master, Slave.

See picture below. Opposite pins has label on it to where you put the jumper.


bc12cfd.jpg

Oct 24, 2009 | Maxtor DiamondMax 6L160P0 160 GB Hard...

2 Answers

I need jumper settings for maxtor n256 model 96147h6 i wish to run it as a slave pls help. thx


For use as slave there is no jumper connected. (Master on/slave off0

Oct 04, 2009 | Maxtor Hard Drive

1 Answer

Jumper settings for a maxtor N256 master with slave


Select the maxtor HDD as master by setting the Jumper to the extreme left of the hdd; i.e. next to the data cable.
Remove all jumpers from the other HDD which you want to put as slave.

Sep 02, 2009 | Maxtor DiamondMax 80 (96147H6) 61.4 GB...

1 Answer

Maxtor 31536H2 Jumper Settings


Here is a picture of the jumper settings for most Maxtor hard drives:

http://www.seagate.com/images/support/en/us/mxo_ata_jumpers.gif

May 15, 2008 | Maxtor Hard Drive

3 Answers

Jumper settings for a Maxtor hard drive, Model 87000D8


Here's the chart that lists the jumper settings for all of the various models of Maxtor hard drives:

http://www.seagate.com/images/support/en/us/mxo_ata_jumpers.gif

The first drive above is a DiamondMax 1750, and

the 2nd is a DiamondMax 4320

Feb 08, 2008 | Maxtor Hard Drive

2 Answers

Jumper settings for a Maxtor hard drive, Model 87000D8


This looks like documentation from the time but it is not from a manufacturer's site.

http://stason.org/TULARC/pc/hard-drives-hdd/maxtor/87000D8-DIAMOND-MAX-7000MB-3-5-SL-ATA3.html

near bottom of page.

Jan 01, 2008 | Maxtor Hard Drive

Not finding what you are looking for?
Maxtor DiamondMax Plus 6800 (91366U4) 13.6 GB Hard Drive Logo

Related Topics:

1,027 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxtor Computers & Internet Experts

Arora Singh
Arora Singh

Level 2 Expert

180 Answers

Computer Links

Level 3 Expert

2386 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

138 Answers

Are you a Maxtor Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...