Question about Linksys EtherFast 10/100 16-Port Workgroup Switch [ EZXS16W ] (104834)

1 Answer

Can't install the Linksys MODEL NO; EZXS16W - Linksys EtherFast 10/100 16-Port Workgroup Switch [ EZXS16W ] (104834)

Posted by on

  • ynotphone
    ynotphone May 11, 2010

    What are you trying to do?

    What is not connecting?

    Why can't you install the router?

    What is the problem....... WE need more Information!



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has answered 200 questions.

  • Contributor
  • 381 Answers

Hello.just a simple way to install..don't plug in the router on the CPU then install 1st the CD installer step by step.after install the driver reboot the unit then after booting plug in the Router wire on the Lan/Network..Good Luck...Thanks..Have a Nice Day...^_^

Posted on May 17, 2009


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: linksys EZXS16W needs power boost to connect to WMB54G Music Bri

can i get this

Posted on Feb 12, 2009

SOURCE: Linksys EZXS16W switch, ports 1,2,3,4,9,10,11,12

I can give you the full manual of that product bro but you should have to install a foxit reader in order to read the file or the manual. First intall this software: Linksys EZXS16W manual:

Posted on May 14, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I log in to a motorola cable modem??

Depending on what model of "modem" you have you may not be able to. If the Motorola unit is just a modem (not a gateway) then you can't, and you don't need to. There is nothing that needs to be configured in a modem.

If the "modem" is a gateway (a modem and router in one physical unit) then you need to open a browser (Internet Explorer) and enter in the IP of the router. For example, Depending on the model of the unit, that IP address (the numbers) may be different that what I typed. You can determine what IP address it is by looking at the product documentation, or double-clicking on your network connection icon in Windows and reading the "Default Gateway" address.

Once you get the correct IP address entered into the browser, the page for the web interface will load. That is where you can configure it.

Jan 18, 2010 | Linksys EtherFast 10/100 16-Port Workgroup...

1 Answer

Linksys EZXS16W Issue

Hi There, first of all you need to connect from your modem or router's port a link. Use a cat5 ethernet cable from the modem to the switch or if you also use a router from a port in back to the switch. Then when you plug in other computers it will see the internet connection. Good Luck...

Oct 28, 2009 | Linksys EtherFast 10/100 16-Port Workgroup...

1 Answer

I don't know if it's my linksys 5 port router or

Could be over heating let it cool meaning complete shut off unpluged 20 mins for all heat to removed. Then check how long it stays on. If it last more than a few mins it is over heating. You need to try to get all dust out of it and try it again. If this time the link is lost after a few mins or hours its was over heating. Also at this point it could be a bad component over heting and a new router is need.
This could be one of many problems good luck.

Sep 09, 2009 | Linksys EtherFast 10/100 16-Port Workgroup...

3 Answers

Linksys EZXS16w switch seems to have port problems

if they are blinking green, they are all working.

check your cable if they have continuity and also if they are patch cable

Mar 23, 2009 | Linksys EtherFast 10/100 16-Port Workgroup...

1 Answer

Where does the phone line go in the lynksys box.

Phone Line?

You need a cable or dsl modem to connect to the internet. From the modem you run an ethernet cable to the "broadband" or "Internet" port of your router.
Also make sure your lynksys is a router, not a switch

Hope this helps


Dec 31, 2008 | Linksys EtherFast 10/100 16-Port Workgroup...

1 Answer

I cant login to the motorola login screen?

For Linksys routers there is no username only the password which is admin.

Dec 19, 2008 | Linksys EtherFast 10/100 16-Port Workgroup...

Not finding what you are looking for?
Linksys EtherFast 10/100 16-Port Workgroup Switch [ EZXS16W ] (104834) Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides