Question about Cfm Klimaire KSWG009H113 Split System Air Conditioner

1 Answer

Doesn't work get the code HS ?

Klimaire 12000 btu heat pump. The machine gives me a code HS or H5?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 152 Answers

Check your filters and coils for blockages , both these codes are pressure related , if the filter is blocked the system will not create the desired environment for the refrigerant to work properly as it is directly related to increasing and decreasing temperature .

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CPJ18-1B Goodman heat pump. has a slow leak. I need to know what Ton or BTU to replace it with.


you have a 1.5 ton. 12000 btu's per ton. your model number has an 18 in it. tells you 18000 btu's

Apr 13, 2017 | Goodman Heating & Cooling

1 Answer

How to fix H5 error


Ipm is inverter protect. Replace PCB (printed circut board)

Oct 12, 2016 | Gree 18000 Btu 20 Seer Ductless Mini Split...

1 Answer

What does error P1 means in pioneer heat pump


It means the power is off or went off to unit . Check for power then power cycle unit to try and restart .

Nov 14, 2014 | Pioneer Ductless Mini Split INVERTER Air...

2 Answers

Pool heater throws code h5? smoked


HS
Water Temperature Sensing Error

A) Inlet water temperature sensor is reporting a temperature in excess of 104 degrees.
Normal operation resumes 2 minutes after inlet water temperature sensor reports temperatures of 104 degrees or less. This error functions in both normal and remote thermostat modes.
or
B) Inlet water temperature sensor is reporting a temperature change at a rate faster than 6 degrees in 60 seconds, indicating a potentially damaging low water flow conditon. Normal operation resumes when temperatures stabilize. If this condition is detected 3 times, the heater will lock-out until the electrical power is cycled off and back on.

Jun 10, 2014 | Hayward H Series Pool & Spa Heater...

1 Answer

What does this mean Hayward pool heater h150FDN gives us an hs or h5 error?


HS = High Limit Sensor
Heaters Maximum Water Temperature has been Exceeded.
A few reasons this occurs...
  • Low water flow thru heater, check :
    • Dirty Filter
    • Opened By Pass Valves
    • Plugged pump impeller
    • Dirty/Full baskets at skimmer or pump
    • Anything that may reduce water flow
  • Sensor could actually be doing its job, in a different aspect, Thermostat failure, and water is overheating in spa or pool?
But anyway, your heaters fault code you asked about is: hs, not h5

May 17, 2014 | Hayward Pool & Spa

1 Answer

High side freezing on 12000 btu 19 ser unit


They do recommend when installing Mini's that you insulate both suction and liquid due to the variable speed compressors and how it is piped threw the system. Could be due to a restriction or a Txv valve that may be stuck as well not opening all the way properly.

May 05, 2014 | Klimaire Heating & Cooling

1 Answer

I have a Klimaire 16 Seer Dual Zone Mini Split Heat Pump AC and the outside unit fan/fan motor have stopped working where can I replace this at? I live near Dallas Tx surely there is something nearby?


You should check the fuses and breakers it might not be something that expensive, it could also be the controller for the outside unit that is bad. Google kllimare dealers and your zipcode.

Sep 02, 2013 | 18,000 BTU KSIM DUCTLESS MINI SPLIT...

1 Answer

Tempstar 5000


The 48 before the VKD in the model number stands for 48000, BTU. For refrigeration, 1 Ton = 12000 BTU. Therefore 48000 BTU / 12000 (1 Ton) = 4 Tons

May 03, 2013 | Heating & Cooling

Not finding what you are looking for?
Cfm Klimaire KSWG009H113 Split System Air Conditioner Logo

Related Topics:

659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cfm Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Cfm Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...