Question about Jenn-Air 24 in. JDB7900 Built-in Dishwasher
We own a Jenn-Air JDB7900 that has been in use for 9 years, it was working fine until this morning. We last used it yesterday morning to run a load and this morning the "Heating Delay" light is lit and the washer will not turn on. We can't use any of the front panel push buttons to select or alter wash setting. Please help!! Thanks, Mark
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
no real reset, nut you can check for power leading to the unit, make sure the bnreaker hasnt tripped , and next if you remove the bottom acees panel you lfind a box to the right . the electrical conne\ction is made behind ther make sure the connection hasnt shaken itself loose.CAUTION LIVE WIRES BEHIND THAT COVER"
Posted on Mar 29, 2008
SOURCE: jenn air jdb8910 does nothing
Had a similar problem with mine a few weeks ago. It was intermittent in not working on delay. My first thought was that the close switch was not working. Upon disassembling the door, and fiddling with the switch, I heard some sizzling on one of the circuit boards. A little more digging revealed some cold solder joints on a couple of board mounted relays.
I removed the board, re-soldered the loose relays, and everything has worked fine since.
Posted on Oct 30, 2008
Hi, I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...
Dishwasher Spray Arms not Spinning
How to Buy Appliance Parts Online
A bad heating element causes many problems in dishwashers...
Dishwasher Problems The Heating Element not Working
I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...
Posted on Sep 29, 2010
SOURCE: After interrupting a wash cycle
It is possible that by opening the door mid cycle, the door switch mechanism has got disengaged. Refer item 11 in this diagram and expose it by taking out the panels around. Then tape it in depressed position and press start button to see if it engages.
If ok then put panel back and readjust the door latch mechanism to make sure the switch engages.
Hope this helps. Please post a comment on what you found. Please rate this solution if it works.
Posted on Oct 25, 2010
Tips for a great answer:
Jun 17, 2010 | Ovens
Jan 30, 2018 | Jenn-Air JSD2690HES Stainless Steel Side...
May 10, 2010 | Grilling
Nov 22, 2009 | Jenn-Air SVE47100 Slide-In Electric...
Nov 17, 2009 | Kitchen Ranges
Apr 24, 2017 | Jenn-Air 24 in. JDB7900 Built-in...
May 09, 2009 | Refrigerators
Mar 09, 2009 | Jenn-Air JMV8208A Microwave Oven
Aug 31, 2008 | Jenn-Air JJW8530C Expressions Collection...
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: