Cannot restart services error 1068

Contact HP/Compaq customer support here:
http://www8.hp.com/us/en/contact-hp/contact.html

It should have no problem ,,connect vga to vag out the back,,of evo,,should work,,also the compaq website is very helpful,,support and driver downloads for everymodel,,goodluck

Try booting up into safe mode and changing the account's password or deleting the account. If it is a BIOS password, then you will have to contact the manufacturer.

go back to your services where you start the print spooler. open the dependency tab. there it will tell you what other services the print spooler needs to have running. check them and if any are disabled change them to auto and restart them. reboot and you should be OK.

hello there:
yes the manual can be downloaded the manufactures website ie www.hewittpackard.com just make sure that you find the right manual for your model

It's not the workstation settings,It's the RPC service settings.

To resolve the problem, fix the dependency information for the Spooler service.
Click Start, Run and type the following:

CMD /K SC CONFIG SPOOLER DEPEND= RPCSS

Alternately, to accomplish this using Registry Editor:
Click Start, Run and type Regedit.exe
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe


And workstation is only needed if you are on a network.

i have the same Compaq Evo N400c its a ram under the keyboard check there to upgrade it i got Compaq Evo N400c 1gb ram

If you forgot your password then you have to take your laptop to hp service centre. Because the laptop need to be disassembled before one can reset the poweron password.

Go to Start, Control Panels, Administrative Tools, Services.
Windows 2000: Go to Start, Settings, Control Panel, Administrative Tools, Services.
Right click on the print spooler and select Properties.
Click on Dependencies to view a list of all the system components that the print spooler depends on.
Under Services, go to each of these dependencies and check the properties. In each case, ensure that the Startup type is set to Automatic, and that the Service status is set to Started.

Did you charge it for up to 8 hours?

Caring for your Compaq Evo N400c Laptop Battery You can improve the life of your Compaq Evo N400c Laptop Battery by doing the following:
When you first receive your laptop battery charge it fully for at least 6-8 hours and then discharge the battery fully by using your laptop unplugged from the mains until it runs down completely.

Repeat this 3 times to ensure your Compaq Evo N400c Laptop Battery will give you the maximum performance.

If you regularly use your Compaq Evo N400c Laptop on mains power for extended periods, removing the battery from your Laptop during these periods will extend the usable life of your laptop battery.