Hiya. I have the same problem. I've tried contacting Timex, to no avail. The watch came with no instructions and while I can set the alarm, I can not seem to change the time. Has anyone had any luck with sorting this out?
It seems to be hit or miss. I did manage to set the time, and then just now, by pressing mode and st/stop at the same time, changed the time of the alarm (which woke me precipitously earlier!) by hitting the lap/rset button when the numbers started flashing. That had happened earlier with the time. The watch appears to have a choice between 12 hr and 24 hr time, an alarm/hourly beep, and a stop watch. The alarm doesn't always show up with the mode button, ditto changing the 12/24. The watch had no instructions. It reads ACQUA 1100 set stopwatch on the front. And for some reason there are two indiglo buttons that seem to serve no other function (i.e. changing the time/alarm). Seems odd to have two: one is upper left, the other, bottom middle.
I'm not sure if my Relic is the same make of yours, but it is digital. All you need to do is hit SET which, if you're looking at the watch straight on, is the top-left corner. The seconds should start blinking. Now you hit MODE (bottom-letft) to cycle through the hour, minute, date, day, (or even if you would
like it to display in the 12 hour AM and PM setting or 24 hour military
time), and use ADJ (top-right) to cycle the digits upward or to reset the amount of seconds to 00.
Was this solution helpful? Show your Appreciation by rating it: