Question about Canon PIXMA MX310 All-In-One Printer

1 Answer

I can't figure out where to load the paper at? Or is it the printer isn't grabbing the paper?

I just bought my printer and had the cable guy help hook it up. Now i can't figure out how to print my emails. Where do I load the paper at?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 433 Answers

Http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=2613&modelid=15603#DownloadDetailAct

Here is your help...download the manual that you can view with you computer. It will show you step by step and you can pause and work at your pace... hope this does it. Now Email,
open the letter as though you were reading, at the top you see an icon of a printer, click..you got it. (or use your keyboard ctrl+P)...there now you know as much as I do...lol
please leave rating...thank you

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message to "Load Paper"


Push something thicker than a plain sheet of paper through. Cut a side of a manilla folder into a 8.5"x11" and let the printer try to grab it during a copy. After doing it's normal "grab the right side until it's skewed and stop", continue to try to push it through.

Nov 30, 2011 | Canon imageCLASS® MF4150 All-In-One Laser...

1 Answer

After no problems at all, my Dell 926 AIO printer told me that there was a paper jam, but there was no paper stuck in it. Now, it keeps telling me that there is no paper loaded in it, but there is paper...


if you can, check to make sure nothing fell in it. ive pulled thumbtacks and a banana peel out of printers before. also sometimes the little rubber wheels that grab the paper dont grab as good as they once did. sometimes adding more paper or putting in less paper helps. i had this one printer that started not grabbing paper so once in a while i would get a wet paper towel and kinda hold it aginst the rubber things and like print a blank page so it would spin a little, but thats just me

Apr 13, 2010 | Dell 926 All-In-One InkJet Printer

1 Answer

The printer keeps saying that the paper isn't loaded, and it's not catching the paper to send it through. How do I get it to grab the paper, and why is it saying there's no paper loaded?


Hi

Please check for a lever on the area where paper goes out? most all in one printer from epson has this lever where you can toggle to grab paper or envelope.

Hope this helps

Apr 01, 2010 | Epson CX8400 All-In-One InkJet Printer

1 Answer

No matter how much paper is in the tray the printer will not feed paper. I can't figure out how the printer grabs the paper. any help?


Open the rear of the printer and turn the rollers with your fingers to make sure they are free rolling.Look in the manual for proper loading of the paper tray and try reloading the paper

Sep 28, 2009 | HP Deskjet 6980 InkJet Photo Printer

1 Answer

Printer does not "grab" paper but can see parts turning


you have bad rollers. you can try to clean the roller with an alchohol wipe but I doubt it will help much. You need to have the roller replaced or get a new printer

May 27, 2009 | Dell 922 All-In-One InkJet Printer

1 Answer

The dock doesn't grab the paper. and if i help it, it just jams up


I had the same problem. Kodak support advised to take a damp lint free cloth ( I used a white handkerchief ) and wipe clean the center roller that grabs the paper. You can rotate the roller manually until you're satisfied you've cleaned it all. I just wiped it right to left several times and all was ok again. I didn't see any residue at all on the handkerchief but there must have been something that was there. Anyway, I think this'll work for you also.
Now if I could only figure out why my printer dock plus is only printing the lower part of pictures even though I installed new ink cartridge. Kodak advised to tighten slack in cartridge. There was not any noticeable slack. Still a no go.

May 17, 2009 | Kodak EASYSHARE Printer Dock Thermal Photo

2 Answers

My printer (Epson R800) keeps on giving me the error 'Media not loaded correctly'. Even before it's even tried grabbing the paper, it starts blinking red on the paper/trash button. I've never had this


Please make sure that the paper that you are using is included under the printer's paper compatibility list.
Make sure that you are selecting the correct paper type on printer settings.
Trash and re-install the drivers.

Apr 29, 2009 | Epson Stylus Photo® R800 InkJet Printer

1 Answer

Not grabbing paper


Try cleaning the rollers again and fan the paper. When you clean the rollers, use alcohol and a lint free cloth. Don't put too many sheets in the feed tray.

Feb 04, 2009 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Lexmark 1185 - paper feed problem


You may be missing a very small jam. Use a torch and tweezers, check down the back, also open cover, check even where you think paper wouldn't jam. Especially in teeth, rollers. Look for foreign debris as well as paper. Also, turn off, unlplug all cables/usb etc and replug, turn on. Finally, never load more than about 20 fine sheets at a time, reset printer settings to default. As a last resort, try uninstalling and reinstalling the printer.

Aug 25, 2007 | Lexmark JetPrinter X1185 All-In-One InkJet

Not finding what you are looking for?
Canon PIXMA MX310 All-In-One Printer Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...