Question about Microsoft Xbox 360 Controller

1 Answer

Joytech I have a joytech wired controller and for some reason the upper left and the lower right lights are on but it doesn't move anything on the Xbox360. So a friend of mines that fixes most of my game systems offered to take a look at it but wanted to see if there was anyone out there that could give me assistance.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 152 Answers
Re: Joytech

Sync the controller. Press and hold the sync button on the controller, and go over to the Xbox 360 console, and press and hold the Xbox 360 console sync button. Wait for a few seconds or until the controller lights stop blinking. Then test out the controller.

Posted on Dec 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My xbox 360 controller is moving with the right stick and viewing with the left

Go into controls on Skyrim and change them to your personal preferences. Hit the start instead of map/item button.

Dec 22, 2011 | Microsoft Xbox 360 Controller

1 Answer

The game controls on the left stick function the same as the right?

The left stick and right stick operate independantly. What they do would vary by game. For most first person shooters, the default is for the left stick to control looking left/right and moving. The other stick would control the other 2 (view up down/ moving on other axis).
If this was a help please give me 4 thumbs up as I am trying to build up my rep on this site!

Mar 03, 2011 | Microsoft Xbox 360 Controller

2 Answers

My new wireless mic wont connect to my wired controller

Hi, i think ur number 1 is configured for wireless functionality. So it will not work when the wire is connected. Try configuring the mic to work when the wire is connected as well. There should be a setting for it in the mic software. It should work after that

Jul 08, 2009 | Microsoft Xbox 360 Controller

1 Answer

Wired Controller not turning on

When you plug it in hold down the X button in the middle of the controller. When it blinks, sync it in the 360, but if it doesn't connect blow the USB connector at the tip of the controller, and hook it up again. If not, get a wireless controller. They are way better.

Dec 28, 2008 | Microsoft Xbox 360 Controller

1 Answer

Left Joystick off

remove batteries. just one hold down buttons 6 & 8 reinstall battery this resets the analog sticks

Dec 19, 2007 | Logitech Rumblepad 2 Game Pad

1 Answer

Right Joystick. . .

I had this same problem with my 360 controller (after modding it, but the solution should be the same..) If you pull up on any 360 joystick it will stick the same way.

The quickest fix would be to take some sandpaper on the inside of where the joystick touches the controller shell, sand it down just enough so the joystick is moving smoothly.

More professional ways would be to cut the little piece of metal that sticks out and goes into the joystick. Just a very small amount, too much will make it hard to press the right thumbstick button.
You could also try some old fashioned grease, just a little bit on the inside, nothing noticeable from the outside.

Also make sure the controller is put back together right, I've taken apart many 360 controllers and sometimes joysticks stick when there's a wire in the wrong place and the shell won't close all the way. (The rumble motors particularly).
Hope this helped!

Sep 16, 2007 | Microsoft Xbox 360 Controller

2 Answers


Normally there is no reason to re-calibrate the Logitech Cordless Action Controller for PlayStation2. In rare cases where the mini-joysticks may need to be re-calibrated, you can use the process below. Please note that this process only works for the Logitech Cordless Action Controller for PlayStation2.
  1. Remove one battery.
  2. Hold the L1 and L2 buttons while re-inserting the battery. (NOTE: Do not touch or move the mini-joysticks at all during this time. It is very important that the mini joysticks are allowed to center themselves during this step or the calibration procedure will not be successful.)
The mini-joysticks should now be re-calibrated. Please note that in some cases you may need to resynchronize the gamepad and receiver after this procedure.

Aug 13, 2007 | Logitech Cordless Action (9633200403) Game...

Not finding what you are looking for?
Microsoft Xbox 360 Controller Logo

Related Topics:

508 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft PC Game Controllers Experts

Pablo Gonzalez

Level 3 Expert

733 Answers


Level 1 Expert

6 Answers


Level 2 Expert

118 Answers

Are you a Microsoft PC Game Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides