Question about Maytag LSE7806A Top Load Stacked Washer/Dryer

2 Answers

Maytag stacked washer/dryer fills with water, makes noise like it's working, but won't agitate, but at the end of it's cycle pumps out but won't spin either. Is this a belt problem? If so how hard is it to change for a decent mechanic? Model # is lse 1000 series 01 serial# 361142PR

Posted by on

  • parkey_micha Jul 09, 2009

    The two belts are actually on the very bottom of the machine,just tip it back a little, easy to replace. two minute job. thanks!

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 272 Answers

Definately sounds like the belt is off. Not too big of a problem for small hands mechanics. Usual problem lately with Maytag is the spindle pulley. For some reason they haven't been tightened properly and the pulley and belts are falling off. Pull it out from the wall remove the panel and see what you've got, really simple on the bottom end. Complicated stuff is up in the control panel. Make sure you get the pulleys lined up as close to level as you can or the belt will jump off on you during spin cycles. Good Luck!

Posted on May 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, It does sound like a belt. You should see a panel on the back with four 1/4" screws holding it.
The belt will be visible ther.
If this does not help, please get me a model# and I can get you better info.

Vic

Posted on May 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Older maytag stackable washer and dryer combo washer fills , washes and spins but water wont pump out


check for the pump belt broken or off,clogged pump or sock or small item clogging the tub outlet to pump hose. the pump pulley may have become loose on the shaft also

Feb 28, 2013 | Maytag LSE7806A Top Load Stacked...

1 Answer

Maytag stackable top load wash maching - will fill with water but then nothing. It just stopped.??


Hi. Listen for an audible click as you just open and close the lid. You should hear a micro-switch. If you do not hear that click you most likely have a bad lid switch. A bad lid switch on a Maytag washer will still let it fill BUT, it will not agitate or spin.

If you hear a click then there are other things to that can cause the symptom that it would spin but not agitate.

Thanks for choosing FixYa,

Kelly

Aug 26, 2010 | Maytag WD16 Top Load Stacked Washer /...

1 Answer

LSE7806A stack: the wash fills to the water level/load size selected. it starts to agitate then stops and begins to fill with water again which causes overflow, help please


Your fill sensor is leaking and allowing air pressure from the clear tube to seep out. First make sure your clear tube from the tub to the water level valve is firmly connected. If it is then you may need to get a new water level adjuster switch.

Mar 09, 2010 | Maytag LSE7806A Top Load Stacked...

1 Answer

Washer won"t fill with water


check your lid switch if its a top load

May 18, 2009 | Maytag LSE7806A Top Load Stacked...

1 Answer

20 year old maytag stack, washer doesn't stop agitating


Your control board is bad. It must be replaced. It can not be repaired.

Mar 21, 2009 | Maytag LSE7806A Top Load Stacked...

1 Answer

Maytag s1000 stacked washer will not start water fill and cycles.


could be wash spin relay stuck in spin must be 15 years old

Feb 19, 2009 | Maytag LSE7806A Top Load Stacked...

2 Answers

Washer won't agitate, drain or spin


quite possible that the fuse has gone bad again, if that s the case i would recommend replacing the fuse, and the lid switch.

Dec 08, 2008 | Maytag LSE7806A Top Load Stacked...

1 Answer

Washing machine fills, but won't agitate


maytag washer dryer stack unit , model # lse7806ace washer fills with water but won't agitate or do anything else. I had the same problem a year ago and replace the lid switch asssemby and fuse and it worked fine until now. the switch clicks when I open and close the lid and the pink and orange wires show continuity with the lid closed.

Aug 29, 2008 | Maytag LSE7806A Top Load Stacked...

3 Answers

Maytag MAV6257AWW Washer


Could you describe the noise you are hearing. This will help to determine what to look for.

Jan 13, 2008 | Maytag Atlantis MAV6451 Top Load Washer

4 Answers

Maytag stacked washer/dryer Model LS7804


OK it may be one of 2 things. I would check the lid switch first. On some maytags the have a lid switch that if it is not working properly it will not let the washer fill. If it will not fill the washer will not wash because the pressure switch did not activate the timer to wash. If the switch checks good you might have a bad timer. If you open the control panel you will find a tech sheet with the wiring diagram. I would follow the fill cycle and check the components. You might also check the water valve to make sure its ok too. But its very rear that both the hot and cold would go at the same time. Good luck!

Jul 11, 2007 | Maytag LSE7806A Top Load Stacked...

Not finding what you are looking for?
Maytag LSE7806A Top Load Stacked Washer/Dryer Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...