Question about Tripp Lite Battery Finder: SMART2200RMXL2U (29112CE754) UPS System

1 Answer

Unit will not power on

I have a Tripp Lite Smart 2200 UPS that recently would not power on. I replaced the batteries (the old ones had cracked) and the unit still will not power on. I had checked the new batteries before installing them and the meter read about 13v. After installing them, I put a meter on the terminals and the batteries are discharging. I checked the board fuses under the heat sink and all have proper continuity. The trip fuse in the rear has continuity as well. I have no lights, jumper 4 is engaged, and batteries are discharging.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Tripp Lite Master
  • 2,696 Answers

Howdy howdy...MeisterApple,

Took me a while to find your ENTRY again
(sorry... My fault: a mere few minutes after you asked)...

I had constructed an answer for you... replete with
SPARE parts... and anti-static (ESD) protective cautions.
(ALSO Strong caution against using CHEESY volt meters on
sophisticated integrated semiconductor technology).

My first suggestion was about those
CRACKED batteries...

Get those New/Good batteries away from your
UPS before it ruins another set (of batteries).

I have been UNABLE to find any decent
MANUALS or TECH SPECS.

Try to contact them in ... Research Triangle Park (RTP)
LENOVO (for pats & repair suggestions)
write to:
Warranty Information,
500 Park Offices Drive,
RTP, NC, 27709


(I found NC - RTP folks to be charming & friendly
(but as yet... never helpful or cooperative (I think they
caused the NORTHERN TELCOM Collapse)).

(((Do not expect much help... just delightful banter))).

The actual circuitry of a voltage monitor, alarm
and battery operated inverter is (in principle) fairly
simple...

The NEW prices ARE pretty impressive... but
good UNITS are available.. and you can repair or
STORE your old one for PARTS... As you see fit.

Just ONE major caution... As you handle these
NEAR INDUSTRIAL grade pieces of equipment...

You should seriously consider begging, borrowing or
buying YOUR OWN anti-static WRIST Bands.

Electro Static Discharge (ESD): a small spark
(you might not even feel)
can utterly destroy
any nearby semiconductor it touches...

Careful (professional) handling is critical to the success

See below (from Amazon)


Donor UNIT:
Tripp Lite UPS SMART2200RMXL2U 2200VA 1600W 120V 15A Battery Backup used...

Similar APC parts
APC SUA3000RMXL3U MODEL 2200 Smart Uninterrupted Power Supply parts...

Repair
Uninterruptible Power Supply Service And Maintenance

ESD protection
(used by real pros (w/Boss watching: big savings)
Anti Static ESD Adjustable Wrist Strap Band Ground Bracelet with Alligator...

Posted on May 14, 2017

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
early1234
  • 871 Answers

SOURCE: replacing batteries on a Tripp Lite Smart 2200

hi there


tripp lite includes battery replacements and they have authorized sellers and distributors. however, they dont sell directly to consumers like us. they do have sales and support if you want someone from them to have the battery replacements installed

call there Customer Support (773) 869-1234

or visit there online site for more details.

http://tripplite.com/index.cfm?countryid=122

hope this helps.


Posted on Feb 07, 2008

  • 5 Answers

SOURCE: rack mount tripp lite ups model# smart 1400rm came

Hi:
I have same problem but you (and me) are in luck because I have another Smart 1400RM working!!! Just need a couple of days to dissasemble because needs to take out from operation and put again on work. My damaged one is worst than yours because an IC exploded, same time I will check for this IC part number too. We will keep in touch

Posted on Feb 28, 2010

  • 732 Answers

SOURCE: I have a Tripp Lite Smart 1500 UPS. when I install

dsquared911, The software wants to be certain that you and you alone are the person that is authorized to view the displayed information. You will need to visit the Tripp Lite web site if more information is required. The home office for them is located (half mile) due west of where the Chicago White Sox play baseball on 35th Street in Chicago. The phone number is 773-869-1234. Tripp-Lite also has software downloads and video clips at their web site. If this was of some help to you, please rate on fixya. Bye for now. 12fixlouie

Posted on Jun 15, 2010

  • 225 Answers

SOURCE: tripp lite avr 550 ups

Check the fuse. Check the input voltage. Since it's AVR, it keeps discharging if the input voltage is below the minimum

Posted on Aug 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tripp lite problems


Look for a little breaker button on the side of the unit. If there is one, press it in and the unit should recover.

Jul 26, 2014 | Tripp Lite Smart Pro SMART700SER...

1 Answer

I have a Tripp Lite Smart 1500 UPS. when I install the power shut down agent on the pc, I cannot open the main console because it asks for a login password. why is that so ?


dsquared911, The software wants to be certain that you and you alone are the person that is authorized to view the displayed information. You will need to visit the Tripp Lite web site if more information is required. The home office for them is located (half mile) due west of where the Chicago White Sox play baseball on 35th Street in Chicago. The phone number is 773-869-1234. Tripp-Lite also has software downloads and video clips at their web site. If this was of some help to you, please rate on fixya. Bye for now. 12fixlouie

Jun 15, 2010 | Tripp Lite Smart-UPS 1500 (smartint1500)...

2 Answers

Tripp Lite OMNI 1000 LCD will not stay on


Turn UPS on: Press and hold the ON/OFF button for one second.
Run a Self-Test: Press and hold the MUTE/TEST button for two seconds (until alarm beeps several times).
The test will last 10 seconds. All LCD Display icons will be illuminated and the alarm will sound.
If the fault icon remains lit, the battery-supplied outlets are overloaded. Unplug powered devices until you remove the overload.
If the "Replace" icon remains lit and alarm continues to sound, the UPS batteries need to be recharged or replaced. Allow UPS to charge for 24 hours and repeat self-test.

Feb 19, 2010 | Tripp Lite OMNIVS1000 UPS System

1 Answer

My ups does not light, which may be the cause?


There could be 2 reasons for this:

First is simple - the LED indicator failed and the unit is fine

Second is the battery is about dead or below the lower limit to hold a charge.

There should be 2 indicator lights on the unit. One for power status and one for check battery or if the unit is overloaded.

One simple test for the battery is to remove all connections to the unit - plug in a small lap of 75 watts and time how long it takes to discharge the battery. With just a lamp on a 750 watt system you should get at least 44 minutes of run time, since that is less than half of the load capacity.

If the unit is over three years old - chances are the battery has to be replaced. That is something you get from Tripp Lite or a qualified reseller.

Keep Me Posted

Feb 02, 2010 | Tripp Lite Internet 750U (internet750u)...

1 Answer

Rack mount tripp lite ups model# smart 1400rm came in, 2 yellow leds lit, makes clicking sound, and will not fire up off an ac line, replaced one leaky cap and r64 is burnt need the value of that resistor...


Hi:
I have same problem but you (and me) are in luck because I have another Smart 1400RM working!!! Just need a couple of days to dissasemble because needs to take out from operation and put again on work. My damaged one is worst than yours because an IC exploded, same time I will check for this IC part number too. We will keep in touch

Jun 13, 2009 | Tripp Lite Lite SmartPro 1400RM UPS System

1 Answer

No Power when turn on so battery wont charge


Try leaving it off, but plugged into the wall outlet so the batteries can charge up. If they are new, they are probably without a charge. The instructions should indicate how long it needs to charge - probably most of the day.

Jan 05, 2009 | Tripp Lite Smart Pro UPS System

2 Answers

Replacing batteries on a Tripp Lite Smart 2200


hi there


tripp lite includes battery replacements and they have authorized sellers and distributors. however, they dont sell directly to consumers like us. they do have sales and support if you want someone from them to have the battery replacements installed

call there Customer Support (773) 869-1234

or visit there online site for more details.

http://tripplite.com/index.cfm?countryid=122

hope this helps.


Feb 07, 2008 | Tripp Lite Battery Finder: SMART2200RMXL2U...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tripp Lite Computers & Internet Experts

Cindy Wells

Level 3 Expert

5159 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

240cpa

Level 3 Expert

548 Answers

Are you a Tripp Lite Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...