Question about Jandy Laars LX Pool Heater / 400,000 BTU / Natural Gas

1 Answer

Low pressure reading on Pool Heater

I have a Jandy LX pool heater, and Im getting a low pressure reading which is prevent the heater from starting. Water flow is fine and fiter is clean. Do I need to replace the pressure switch?

Posted by on

  • tdow279 May 16, 2009

    I have the exact same problem.  Just opened the pool and heater won't start due to low pressure flashing on screen.  Does anyone know what is causing this and how to fix it?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this problem with ours last year. I replaced the water pressure switch and it began working fine. We later had a symptom that the blower would start but it would not ignite. The ignitor rod was corroded so I took it out and sanded it with some sandpaper---worked fine...until I dropped it trying to reinstall and it broke. Bought a new one and it works fine now.

Today's problem is related to the blower now.... it is always something, isn't it?!?

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the pressure control switch do on a Jandy lx heater?


it shows that the filter pump is working and that you have water flow through the heater

Jun 01, 2014 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

Pressure switch light going off and heater won't start


back wash filter. clean out pump basket, ensure you have proper water flow. Once you have ensure proper water flow and problem still exists, you will most likely have to replace the pressure switch

Mar 17, 2014 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

So we have the jandy laars lx.... we have had it for 3 years no problems we use it with pool and spa and its gas........ the buttons work you can choose pool or spa just fine but when you choose one... the...


This heater wont start if the pressure switch is bad or clogged. Remove the pressure switch and clean it out really well, or just purchase a new one. It should only be $30-$50 depending on where you go to get it

May 03, 2011 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

LARRS LX 400N It will not start the ignition sequence. Flame switch is OK. Limit switch mounted on the right outside of the upper cabinet is OK. Have low voltage. The pressure switch is open (is there...


"The pressure switch is open (is there supposed to be water pressure on the pressure switch so that it will close?)"

All switches need to be closed in order for this heater to start.
If you know you have good water flow (at least 50gpm) and your finding the pressure switch still open, it is either failed or clogged. Clean or replace the pressure switch.

Apr 12, 2011 | Jandy Laars LX Pool Heater / 400,000 BTU /...

2 Answers

Message 'LOW PRESSURE' on my Jandy LX pool heater. How do I check the fuse?


Check your flow and pressure from the pump first.... May need backwash, skimmer/strainer cleaning.. If you get an error message, chances are the fuses are ok.

Jun 16, 2010 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

My laars lx pool heater is blinking LOW PRESSURE. How do I fix?


The heater needs good water flow or it will overheat. You probally have a full basket in your pump or your filter is dirty.

Jan 20, 2010 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

Low pressure flashes when i try to turn on the heater


check strainer and skimmer for excess debris that will cause low flow to heater thus not engaging pressure switch.make sure filter is clean.if all of these check out ,take continuity reading on pressure switch.if no continuity,try to adjust pressure switch if it wont adjust ,its faulty.take extreme caution when adjusting make htr will shut down when pump goes off

Jun 23, 2009 | Jandy Lx Pool & Spa Heater - Electronic...

Not finding what you are looking for?
Jandy Laars LX Pool Heater / 400,000 BTU / Natural Gas Logo

1,212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

7915 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Ian Kime
Ian Kime

Level 2 Expert

77 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...