- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The printer error has occurred.
1.Turn off the machine and unplug the power cord from the power supply.
2.Plug the machine back in and turn the power on.(if you disconnect the power plug, all the faxes stored in the machine's memory are deleted).
If the above solution has not resolved your error, please contact your nearest service center.
Hi, these means MPWS power supply voltage error (low voltage error), try in another power supply outlet. If these doesnt help write me on email@example.com for service manula and Ill guide you how to raise bias.
You can try the following reset - it will most of the settings back to the default options. Unplug power cord to the machine. Press and hold down Menu. Plug power cord back in. Let go if menu when fax/scan/copy flash. You may see either "maintenance" or "machine error xx" on the screen. Type stop/exit, 9, 1. The machine should show "param init" or similar to show that the reset is being done. It will then go back to or machine error. Type stop/exit, 9, 9. This should take the machine out of maintenance mode and back to normal. If the error is still present the machine will require an engineer to resolve the issue.
I would like to ask you that I have a kyocera mita copier KM1505 and displays the code error like C610,So try to help me in order to resolve or fixe that problem.