Question about Philips Magnavox 27MS343S 27" TV

2 Answers

Tv and pc monitor


Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 33 Answers
Re: tv and pc monitor

Hi, your best bet is to get a LCD/laptop universal adapter from ebay like this one:

 Do a search for the one that is cheapest and nearest to you. These come with lots of different heads and voltage is variable so you can just adjust it to you needs.
Hope this helps. Si :)

Posted on Oct 12, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers
Re: tv and pc monitor


Do you have the old AC/DC Adapter?

If so, what is the output voltage rating and current stamped on it?

Also, the connector to insert into the monitor must be identified. Is it round with a center socket? If so, is the center socket 2.1mm or 2.5mm? And the last thing needed is if the center connection is hot (16V~ DC) or not (ground).

If you can supply this information, I can probably point you to a working replacement.

Let me know.

Posted on Oct 12, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Who to do set up for wii game

  1. The AV Multi Out plug that is included with the Wii will allow you to connect the console to most TVs or VRCs. First, look at the back of your television AND your VCR and see if you have colored holes label "Input". Though most TVs have them, almost all VCRs do as well. If you are unable to find a set of yellow, red, and white AV inputs on the back of your TV, try looking on the sides, top, and bottom of the TV. Look for any hidden panels or doors as well.

    Connecting to a Television
    • Audio/Video (AV) inputs are typically located on the back of the TV, but occassionally are on the sides, top, or bottom.
    • Look for inputs marked Audio and Video IN.
    • Do NOT connect your system to anything marked OUT.
    • Don't see these inputs on your TV? Click here.

    1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console

  2. Insert the DC plug on the Wii AC Adapter cord into the DC Input connector on the back of the Wii console.

  3. Insert the AC plug into a 120V AC wall outlet

    CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and insert fully into the outlet.

  1. Plug the transformer into the wall outlet.

The Sensor Bar can be placed either above or below your TV screen. Decide which option best fits you and click the image below for additional set up help, including mounting the Sensor Bar and proper alignment.

Jan 12, 2011 | Fisher PC-25R20 25" TV

1 Answer

I have a one year old Broksonic 19" flat screen LCD TV. I wanted to use it as a computer monitor, so I hooked up the VGA cord and selected PC as the input. Nothing. What am I doing wrong? Charles...

Is the computer set to send data to the video port? Laptops often have the external port disabled; check the BIOS. (This is often accessed by pressing F1, Esc or F2 before the OS loads. Check your documentation.) Then you can set the preferred monitor by looking at the Display settings.

Some desktops have a similar issue where only one port is active (DVI, HDMI, and VGA). You may need to connect a different monitor via the enabled port or use an adapter to get the VGA cable to mate with that port to change settings. (In the case of computers with video graphics cards and motherboard video ports, only one item is active. Try moving your cable with an adapter if needed to one of the other ports. Then change the BIOS setting if you do not want to continue using the adapter.)

Try a different video cable and make sure it is fully connected to both the computer and the monitor. Damaged cables are always suspect.

What OS are you using? Do you need to download drivers for the Broksonic? Go to and ask in the Product support section - they don't seem to have a direct link on the site. (For example some TVs are not compatible with the drivers in the Mac OS.)

I hope this helps.

Cindy Wells

Aug 21, 2010 | Broksonic TV

1 Answer

How do i use my tv as my pc monitor. so i can watch movies from my computer ?

The problem may be the resolution. Your TV will run 1920x1080. You might try changing the resolution to that and then try connecting to TV again.

Oct 26, 2008 | Philips 34PW8502 34" TV

1 Answer

Magnavox HDTV model# 15mf605t/17

Just figured this out based on a description of features.

You must power on the TV with the remote control - if you use only the power button on the monitor, it goes straight to stand by mode (the amber light).

Aug 11, 2008 | Standard (CRT) Televisions

3 Answers

Looking for a power supply

Sorry about the above post, but I wasn't signed in yet and this crazy GLITCH here put me down as a GUEST instead. The above post was mine, as I'm resending it again below.




AC/DC power adapter + Power cord. 24VDC power adapter + power cord for Toshiba 20HLV15 20" Flat Panel LCD TV

Input :100-240VAC (50-60Hz)
Output : 24VDC 4Amp (72W)

Part# ADP-2404-3PX

Approx cost: $50-60

Call Toshiba USA and give them that p/n for an exact cost quote plus shipping.

Best regards,


Apr 01, 2008 | Toshiba 20HLV15 TV

1 Answer

Attention No Video Input

Check your input cabling and connectors and make sure you have a good input signal. Put another tv on this same input cable and see what happens. Keever

Dec 20, 2007 | Philips Magnavox 27MS343S 27" TV

1 Answer

Mitsubshi 32 inch cs-31303

on the A/V PCB . Check C206 33 UFD 16 V off pin 17 of IC201 on the A/V PCB. Check C207 47 UFD 16 V on the A/V PCB. Check C211 47 UFD 16 V on the A/V PCB.

Sep 21, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

655 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides