Question about Phones
I need to add a call extender to the switch
it has 8 trunk lines.
2 ports already set up for the call extender.
i need to know how to program the sx50 to direct the call to the call extender instead of the console.
You can switch to "night" mode on the console and the incoming calls should ring on the cordless. try it.
Posted on Dec 17, 2008
SOURCE: SX-50 Attendant Console Failure
The console uses 3 pair USOC wiring from the console to the jack on the control card. Look at the Mitel provided cable from the console. It should be 6 pin and you can make sure the console is functional by moving it to the cabinet and plugging it in. If it works, you need to cable 432516 straight through on a 6-wire modular plug and terminate it in the same order on a jack where the console is. They must be paired for the long run.
I have a huge non-indexed pdf of an SX-50 if you need it. The console explanation is figure 5-14 of the -200 practice if you have it.
Posted on Mar 16, 2009
From a DTMF station set installed as the test line on equipment #1, go into trunk group programming (Command #66)
The SX-20 display will show programming registers.
A B C D E F G H
A,B = Trunk equipment Number (1st trunk should be displayed)
C = Register 1
D = Trunk Group Membership 0 = Incoming only
1 = Group 1
2 = Group 2
3 = Group 4
4 = Group 4
E = Trunk Type 0 = Standard CO Trunk
1 = Dictation Trunk
F = Reversal Meaning 0 = Not Incoming of Disconnect
1 = Incoming Call
2 = Incoming Call or Disconnect
G = Disconnect Timing 0 = 60ms
1 = 500ms
2 = 1.5 sec
3 = 4 sec
H = Start Type 0 = Loop Start
1 = Ground Start
Move to the appropriate register using the ENTER/NEXT function (star key).
Change the data as required.
Exit programming (# key)
Hope this helps!
Posted on Mar 25, 2009
Tips for a great answer:
Oct 08, 2014 | Phones
Jul 25, 2008 | Mitel Phones
Jul 14, 2014 | Mitel Phones
Apr 19, 2014 | Mitel Superset 4015 Corded Phone
Jul 10, 2013 | Mitel Phones
Mar 25, 2009 | Phones
Mar 15, 2009 | Phones
Jan 15, 2009 | Uniden 5.8GHz Cordless Phone
Nov 11, 2008 | Uniden 5.8GHz Cordless Phone
Oct 31, 2008 | Mitel Superset 410 Corded Phone...
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: