Question about HP ATX-300-12Z (ATX30012ZBD) 300-Watt Power Supply

2 Answers

Wiring query Can you please tell me the two wire colours or the wiring codes to use to trip the power box into manually operating with out plugging it back into the computer as its going to be use as another power source? This is for a 300 watt power base.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 230 Answers

Use a jumper lead and shirt the green (power good) signal to a black wire (gnd) they are conveniently side by side. This will work on all power supplies regardless of wattage.

Posted on May 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 13,433 Answers

Hi

pinout on this page
http://pinouts.ru/Power/atxpower_pinout.shtml

Short 14 and ground, see the above page make sure you sort the right ones, I just tested it with a extra powersupply, shorted 14 and 16 (gnd) psu fan and 12v fan connected to molex turned on fine.


Posted on May 10, 2009

  • Ekse May 10, 2009

    while the above advice was fine, some powersupplys don't have the green wire, then just follow the pinout 14th pin and gnd, on mine it was silver instead of green. there is no green wire on this powersupply.

    thanks and good luck.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Golf MKV. 1. What is the wiring colour code for the brake lights? 2. What is the location and colour code for the ACC? Where is it located on the car?


The only thing that I can do is provide a possible source for wiring diagrams. VW guards their technical information and no free diagrams or repair manual are around unless someone downloads one at a VW owners forum (I suggest you join a few)


http://bbbind.com/free_tsb.html

Feb 22, 2017 | Car Audio & Video

1 Answer

Gday can u please help me


Every Make and model will have different color code , buy a work shop manual for that model. I will have a wiring section with a color code. Or you could trace each wire with a OHMS meter or test light.

Aug 07, 2016 | Cars & Trucks

1 Answer

Please tell me about the wiring Loom What colour goes to what colour


get a wiring schematics out of a workshop manual but normally like coloured wires connect in plugs

Mar 13, 2015 | Cars & Trucks

2 Answers

Can some one tell me where the earth wires go and the rest of the plugs on a fisher and paykel washing machine mw511


If you are not sure of the wiring contact an electrician!

Connect each wire to the correct terminal. Slacken the screw and push the bare wire into the hole. Re-tighten the screw. Make sure the terminals are tight and that there is no bare wires or loose strands of wire showing. It is often easier to push the pins up slightly when connecting the wires.
  • Brown - Live
  • Blue - Neutral
  • Yellow and green - Earth
Older appliances may have different colours:
  • Red - Live
  • Black - Neutral
  • Green - Earth

Nov 23, 2014 | Fisher and Paykel Washing Machines

1 Answer

Dishwasher LD-1420T1 tripping power in the house?


Okay, this could be tricky because depending on who installed it, they might have wired into it. Check your garbage disposal and if you have anything else plugged in nearby, check that wiring too. Some installers have a nasty issue when it comes to hard wiring. They don't like doing it. So instead of hard-wiring your garbage disposal, they'll cut it in to your dishwasher. If your garbage disposal or anything else is wired to your dishwasher the load on the washer and the current the washer is using is too high. That's going to trip your breakers. You should probably contact an electrician and have them check the breaker box to make sure it's wired correctly. You may need to upgrade the breaker or have the dishwasher circuit upgraded. If it's an old house, it could be anything but first, check to see that nothing is wired into your dishwasher. You can tell if you have a few switches in the same outlet and turn them off. If your garbage disposal won't work and the DW won't either, then you have a wiring issue. That's the easiest way to start.

Apr 06, 2014 | LG LD-1420T1 Dishwasher

2 Answers

Need a wiring diagram please


wiring diagram or colour code for kenwood cd player model kdc-5108

Nov 16, 2009 | Kenwood KDC-W3534A CD Player

1 Answer

Need wiring doagram so i can wire it to the box


here is the link to the manual for the motherboard you need, even though the product name may be different the system board architechture and wiring is all the same.

http://downloadmirror.intel.com/15332/eng/D845HV_D845WN_ProductGuide01_English.pdf

if this resolves your query please rate my answer etc accordingly

regards

Apr 21, 2009 | Gateway Intel (El Paso 2) Motherboard P4...

1 Answer

How to put all the wiring from box onto the motherboard


can you tell me whitch kind of model from msi you have?
so i can tell you a link to take his manual and wired up your wires.

Apr 08, 2009 | Intel Motherboard

2 Answers

Wiring diagram


the make of board is MSI model number MS 7094 ver 1.4. What I need is the colour codeing of the wires especialy the ones pow led +- which way they go as they are seperate hdd which is black and white, power sw orange and white, reset sw blue and white I have a yellow plug which says hdd audio I do know that some of these wires go into JFP1 and JFP2 but not sure which way they go as the + and -
Thanks Lipreader

Jul 10, 2008 | Intel Motherboard

Not finding what you are looking for?
HP ATX-300-12Z (ATX30012ZBD) 300-Watt Power Supply Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...