Question about Sansui COM312AD 13" TV/VCR Combo

2 Answers

13" Sansui TV and VCR combo

Help!!!  I pressed some buttons and now I can only get 13 channels on the tv. How do I get the rest of the cable channels? Can anyone help me with this?

Posted by on

  • MissieJ Oct 13, 2007

    Thanks for your help - much appreciated!

  • sleepingbty Nov 14, 2007

    I have the same problem but I lost the original remote. I have an all in one. How do I get to the menu to set the channels for cable or broadcast and program them?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem but I lost the original remote. I have an all in one. How do I get to the menu to set the channels for cable or broadcast and program them?
email me at adrian_thechamp@hotmail.com

Posted on Nov 03, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

Ok! you can auto search the TV to find all Cable channels! but first you have to set mode TV /CABLE set to cable then you auto search!

Posted on Oct 12, 2007

  • alexandriaw8 Feb 09, 2011

    how do you set the tv to tv/cable mode?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code for universal sony remote sony-v201


Hello
Sorry to say that Sansui is not listed to Sony V201 remote control. Anyway I'll give you some three digit and four diit conds for Sansui. I'm not sure will it work, but try these, sometimes you may get.

Three digit universal remote codes for Sansui are:
135/ 136
Four digit universal remote code for Sansui TV/VCR combo is
0310

Four digit universal remote code for Sansui TV are:
0135 0310

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

NOTE: Switch OFF and switch ON your combo with its FRONT PANEL POWER ON-OFF SWITCH each time before trying an other code.
Hopes you will be helped.
OK.

Jan 27, 2011 | Sansui COM312AD 13" TV/VCR Combo

1 Answer

How do i use the code search on the ucr universal remote


Hello

Four digit universal remote code for Sansui TV/VCR/DVD combo are:-
0394 0967
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
Ok

Jan 07, 2011 | Sansui TDC2075 20 in. TV/VCR/DVD Combo

1 Answer

I have a sharp tv/vrc combo without a remote. I'm using a universal remote but wont let me get into the menu. I need to change it from cable to air. Can someone help?


For sharp TV-VCR Combo with universal remore control,

1/ Start by pressing SET & TV at the same time, the LED goes solid RED

2/ Press 009 or whatever code works for your TV.

3/ Confirm that you can now use your control to flip channels..

Then,
4/ Just press the blue button 2-/12. That allows you to change from cable to air and vis-versa. Hope that helps.

Ade

Jul 04, 2010 | Sharp 13VT-R100 13 in. TV/VCR Combo

1 Answer

Sansui COM3101A 13" Tv/VCR Combo Problem


You can try the codes for Orion, Emerson, and RCA. Call the number on the back of the set to see if the original remote is available.

Sep 28, 2008 | Sansui COM3101 13" TV/VCR

1 Answer

Need to find a code to work the tv/vcr combo from a comcast digital remote


Try the codes for Orion, Emerson and RCA as well as Sansui. Good Luck!

Jul 22, 2008 | Sansui COM3101 13" TV/VCR

1 Answer

Sansui TV/VCR 13" model COM311AD


on some tv's the menu can be accessed by pushing both channel up and down buttons at the same time. otherwise you may just have to get an all in one programmable remote control.

Mar 25, 2008 | Sansui COM311AD 13 in. Combo

1 Answer

VCR plays tape with only sound and some channels seem deleted.


Needs the vcr heads cleaned, and get a universal remote with a menu button to change the tuner setup.

Jan 25, 2008 | Toshiba MV13P2 13 in. TV/VCR Combo

4 Answers

Programming Device Control code for Memorex MVT2135B


21479 is the Sansui code that worked for me with the Memorex TV/VCR combo MTVT2135 and the Comcast Custom DVR 3 Device remote.

Jan 20, 2008 | Memorex MVT2135 13 in. TV/VCR Combo

1 Answer

I have the 13 inch and...


If you get channels 2 to 13 nice and clear but the rest are snowy, it means that the TV is set to the broadcast channels, which means that for the channels above 13 it is tuning in the old-fashioned UHF channels. If the TV is set to the cable mode then it tunes in cable channels above 13. To do this, enter the menu and navigate to the tuner settings, set the tuner to standard cable and then do the autoprogram, and the tuner's memory will be set for your cable system.

Aug 03, 2007 | Emerson EWC1903 19 in. TV/VCR Combo

Not finding what you are looking for?
Sansui COM312AD 13" TV/VCR Combo Logo

Related Topics:

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75289 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...