Question about Lexmark T642 Laser Printer

2 Answers

T642 Laser Pinter

927.02.Service Fan Stalled Lexmark T642 Laser Pinter Problem

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 696 Answers

Hi,

This is a call for service message generally requiring professional repair.

There are generally only four reasons:

No power, Check fan power leads as one may have slipped off it's fitting

Jammed: Either too dirty or a shred of paper may be blocking the blades, pull free and clean off with compressed gas(no more than 25ft/lbs)

Dead fan: Call a repair man or call lexmark and give them the exact code,they will identify the fan and can sell you the part.

Dead controller board: as with above call a repair man or lexmark with code and order spare part.

The only bad news other than you may need a repairman, if you order the fan or controller board it may be the other and no way to know ahead in some cases.

The good news, if you're still under warranty, lexmark has good repairmen and fast response times in most areas.

Either way, Hope this helps FixYa,


Chris

Posted on May 10, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Chris is right. But I'd bet its a dead fan. If I'm recalling correctly I think there are 2 fans on the printer. The last number in the error code may dictate which one it is.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can i do when my lexmark T642 printer displays 922.02 service fuser error when the printer was never used?


It could be the connector to the fuser from the LVPS is not connected properly. It could also be the Thermistor on the fuser is bad.

Jan 31, 2017 | Lexmark T642 Laser Printer

1 Answer

927.03 service fan stalled


hello
This solution was tested for x 204. Get the right cover of the printer. See the fan. Fan connector is located to the card enters the socket. Socket located at the bottom part of the written 4R7. Install this part by removing the 4.7 ohm resistor. The problem is solved.

Sep 24, 2013 | Lexmark T642 Laser Printer

1 Answer

Lexmark T642 929.00 Service toner Sensor


The most common cause of this error is the toner cartridge. For more details on how to troubleshoot this problem, please click on the below.


http://bitly.com/oTXG4M


If you need further assistance please contact Lexmark Technical Support.

Oct 17, 2011 | Lexmark T642 Laser Printer

1 Answer

T642 æ??印æ?¶å?ºç?°ï¼? 929.00 service toner


f you are looking for the Lexmark printer driver then ;
You can download the Lexmark printer drivers from theirsupport WEB site.
Please click on this link and select your model printer todownload :- http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Jan 08, 2011 | Lexmark T642 Laser Printer

1 Answer

Lexmark X646e 927.02 Service fan stalled


This means the fan on the top of the machine, just below the scanner is not working or not working correctly. You will have to replace it.

Jan 06, 2010 | Lexmark X646e All-In-One Laser Printer

1 Answer

Lexmark T642 When printing, LCD displays


this error is a scanner lost lock error and can be caused by the scanner or the logic board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure the scanner is approximately 85% the logic board 15% i would change the scanner

Nov 23, 2009 | Lexmark T642 Laser Printer

1 Answer

Lexmark T642 Laser Printer error message922 02


Service fuser error requires a maintenance kit, this is approx $1000 + installed, if this is new, I would be taking it back because it shouldnt have this error. You possibly might be able tto fix it by replacing the fan in the back but thats only worked for me in approx 1 out of every 10 times.

Jan 13, 2009 | Lexmark T642 Laser Printer

2 Answers

Printing Issue - Lexmark T642


Chip on toner is bad, try puting in old one to reset and switch it with new one, sometimes turning off and on several times helps.

Mar 12, 2008 | Lexmark T642 Laser Printer

1 Answer

Lexmark error codes


Too many to list here. Try justmanuals.com, you can get the service manual for about $10.

Jan 14, 2008 | Lexmark T642 Laser Printer

1 Answer

Optra 642 series


Is it only that document or from any OTHER doc source, word, excel etc.....

Nov 13, 2007 | Lexmark T642 Laser Printer

Not finding what you are looking for?
Lexmark T642 Laser Printer Logo

1,623 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...