Question about Altec Lansing MX5020 Computer Speakers
I can't open the right channel of my MX 5020 altec lansing pc speaker system and was wondering if anyone knew how to do it. ive removed all the screws but it seems to be held in place pretty firmly by some other screws which i cannot seem to find. please do help as im eagerly waiting to hotwire it to my amp!
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to repair atp3 altec lansing
Best bet would be to just strip the wire with a wire stripper or utility knife and twist the bare ends together to fix the connection. A little electrical tape around those wires and you should be almost good as new. Of course you might notice some difference in quality but I'm pretty sure the only way round that would be replacing the cable.
Try it out and let me know how it works out for you. If you know how to solder it might be a good idea to solder the connection as well.
Posted on Jan 05, 2008
SOURCE: Altec Lansing ada745 fuse
It is written on the sub. You can also take it out or look at the spare which is taped to the power cord wall plug. I believe it's T1A 250V fuse
Posted on Jun 22, 2008
I did the same! Thanks for suggesting a call to Customer Support (800)258+3288. The guy didn't seem overly pleased to help, but he did promise to send me a new power supply. Also, he said that they don't make the iM7 anymore, but I had already found out that the iM9 uses the same power supply. I, too, will wait and see.
Posted on Jul 07, 2008
i'm guessing you have an audio output problem.
you might not have installed the sound card driver or your sound card is not functioning.
this speakers does not come with drivers... just plug in to speaker output which is the green one. turn the speaker on and walah!
Posted on Aug 01, 2008
Your adapter is Part No. AVX300-A6859, Model No. 9701-00748-IUND.
Or You could get a universal that is rated for output of 18volt DC, 650ma, Center Positive.
I have used a 15volt DC, 900 ma with no problem, but I never run the volume high.
Posted on Dec 04, 2008
Tips for a great answer:
Mar 01, 2013 | Altec Lansing ADA 885 Computer Speakers
Apr 09, 2011 | Altec Lansing ADA745 4 Speakers
Sep 20, 2010 | Audio Players & Recorders
Mar 24, 2010 | Altec Lansing Inmotion-IM600...
Oct 17, 2008 | Altec Lansing AVS 500 Computer Speakers
May 13, 2008 | Altec Lansing ACS 251 Computer Speakers
165 people viewed this question
Usually answered in minutes!