Question about Canon imageCLASS MF4150 All-In-One Laser Printer

1 Answer

Power interruption during firmware upgrade

Hi all,

I was using the firmware update tool when we had a blackout. Noow when I turn on my MF4150, both the processing data and error lights are on constantly and my computer won't even detect the printer.

Any thoughts? The manual says my control board may be damaged and need to be replaced?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 32 Answers

Than is true, your printer is bricked, and has not internet info, such as how to turn on. your printer will have to be rapaired or replaced, there is nothing you can do.

Posted on May 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to hard reset my Canon MF4150? It lost power while updating firmware and now all the lights are on with no display on LCD.


If you lost power in this situation, then sadly it is unlikely that you can recover from it, as the camera has no working software to tell it what to do. This is why the instructions for upgrading firmware specifically state to use mains power or a fully charged battery.

Jun 22, 2017 | Canon Cameras

1 Answer

How to up date hp Officejet 6700 Primium all-in-one code auf8437ojde38


  1. Switch on the HP Officejet 6700 series printer and wait until the printer is READY. [The Power light should be on]
  2. Double click on OJ6700_R1435A.exe to launch the HP Printer Update utility. A list of OfficeJet 6700 Premium series printers detected will be displayed on the screen.

    Note: If the Wired network printer you wish to upgrade is not displayed in the detected printer list, click on the Refresh button to scan for printers connected via the wired network.
  3. Click on the checkboxes on the left to select single or multiple OfficeJet 6700 series printers you wish to upgrade.
  4. Click on the Update button to start the firmware flashing process.
  5. Message showing "The selected printer has been updated successfully" will be displayed. Firmware flashing will begin.

    CAUTION! Do not interrupt the printer during the upgrade process. Printer may be damaged if power is interrupted during the firmware upgrade process.
  6. When the printer has successfully completed the flashing process, it will automatically print out a Self Test Diagnostic Page, that will show the new firmware version.
  7. Click on the Done button to close the HP Printer Update utility.
HP Officejet 6700 Premium All in One Firmware

Nov 14, 2014 | HP OfficeJet 6700 Premium All-in-One...

2 Answers

Firmware interrupted on steelseries raw keyboard now keyboard has no power..just wont work


Here is the solution, It may help, use a different pc or laptop...
and then ran the firmware fix from steelseries.heres a link cdn co steelseries com

Apr 10, 2014 | SteelSeries Apex Raw Keyboard

1 Answer

I tried to upgrade the firmware of my router(WRT54GL) but during the upgrade process I got a message upgrade interrupted but with a continue button. I pressed the continue button, but the upgrade never...


Hi just switch it off and wait for 15 second turn it should come up hope you not disconnect the LAN cable or power cable from you router during upgrade otherwise your router maybe cant be use anymore but if it is stopped by it is own it could be wrong firmware version or incompatible one you have entered should you need any help please contact me via my weblog http://computernetworksupportindubai.com/

Jul 22, 2011 | Computers & Internet

1 Answer

System error e225


Hello 3G,

To resolve the issue Error e225,

Turn the main power switch off and then back on-ICMF 4000 series/D400 Series

or

Update the firmware :

There is a risk that the MF4150 will not operate if power interruption occurs
during the firmware update. Please make sure MF4150 is connected to
reliable AC power source.

1. Save the downloaded file "MF4150_FirmwareUpdateTool_V0xx.exe on local drive. (i.e. desktop)
Computer Requirements for update
- Microsoft Windows 2000 or XP (32bit)
- Equipped with a USB port (either 1.1 or 2.0)
- Free disk space: 100 MB or more
2. Make sure that Processing/Data indicator (Green LED) on the MF4150's operation panel is turned off.
If the light is lit or blinking, wait until all the jobs are finished (i.e., COPY, PRINT, and SCAN), and that the Processing/Data indicator is turned off.
3. Make sure that Error indicator (Red LED) on the operation panel is turned off. If Processing/Data indicator (Green LED) is lit and Error indicator (Red LED) is blinking at the same time, jobs are held in the printer memory due to an error, possible cause is out of toner or paper has run out, or toner cartridge is not installed. Check the LCD for and error message and refer to the documentation that came with the printer to resolve the error.
4. Disconnect Fax line cable from the MF4150 to prevent Fax reception interruption during firmware update.
5. Make sure the USB cable is directly connected to the MF4150 and your computer.
  • Do NOT use a USB hub to connect the cable, as it may lead to a connection error.
  • Make sure the machine is not in the Sleep mode (i.e., [Energy Saver] key on the operation panel is leit). To exit the Sleep mode, press [Energy Saver] and confirm that the Energy Saver light is off.
  • You need to log on as an administrator to perform this update.
  • Make sure that no other applications are running on your computer.
6. If [Found New Hardware Wizard] appears on your PC screen, click [Cancel] to exit the screen.
  • [Found New Hardware Wizard] screen may be displayed multiple times. Cancel anytime you encounter this screen while performing this update.
7. Double-click ?MF4150_FirmwareUpdateTool_V0xx.exe? that you downloaded and saved.
8. Double-click "MF4150_V0xx_FirmwareUST.exe" that is in the newly created folder as a result of uncompressed downloaded file.
9. Confirm that the machine is in the ready status, and then click [Transfer]
  • If the printer is not detected: Check if the printer's power is turned on and the USB cable is properly connected. Then click [Retry] to proceed.
10. The firmware is transferred to the printer.
  • Never turn of the power to the MF4150 while firmware is updating. If power interruption occurs while the firmware is being updated the control board will be damaged and will need to be replaced. The replacement of the control board and labor will not be covered under warranty.
  • If an error occurs while transferring the firmware: Check if USB cable is properly connected. Click [Retry] to proceed.
11. When [Firmware transfer is complete] appears, click [Exit].
The printer starts the update process automatically.
<ERASE FLASH ROM> appears on the printer's display while the existing firmware is being erased.
Then printer's display shows <FIRMWARE UPDATE> while updating the firmware.
When the firmware update is complete, the printer's display shows <FIRMWARE UPDATE OK> <MACHINE POWER OFF/ON>
12. Turn printer's power switch OFF, wait 2 seconds then turn the power switch back ON. Check that there is no error on the printer display. Reconnect removed fax line cable.

Jun 22, 2011 | Canon imageCLASS MF4150 All-In-One Laser...

1 Answer

Hang


if the phone hangs every now and then, then u should get your firmware updated. if it is a smart phone then it's easy to upgrade/update your phone's firmware otherwise you can contact the customer care to get your phone updated.
please give the specific model no. of your phone to get to know detailed instruction about the specific phone on how to update the firmware. in most of the cases you can do so by connecting it through PC SUITE.

P.S. any interruption during the FW upgrade can make your phone brick.

Feb 28, 2011 | Cell Phones

1 Answer

Canon imge class mf 4150 e225 eroor?


First:
Try to get the latest firmware at LINK.
Here is how to:
1. Save the downloaded file "MF4150_FirmwareUpdateTool_V0xx.exe on local drive. (i.e. desktop)
Computer Requirements for update
- Microsoft Windows 2000 or XP (32bit)
- Equipped with a USB port (either 1.1 or 2.0)
- Free disk space: 100 MB or more
2. Make sure that Processing/Data indicator (Green LED) on the MF4150's operation panel is turned off.
If the light is lit or blinking, wait until all the jobs are finished (i.e., COPY, PRINT, and SCAN), and that the Processing/Data indicator is turned off.
3. Make sure that Error indicator (Red LED) on the operation panel is turned off. If Processing/Data indicator (Green LED) is lit and Error indicator (Red LED) is blinking at the same time, jobs are held in the printer memory due to an error, possible cause is out of toner or paper has run out, or toner cartridge is not installed. Check the LCD for and error message and refer to the documentation that came with the printer to resolve the error.
4. Disconnect Fax line cable from the MF4150 to prevent Fax reception interruption during firmware update.
5. Make sure the USB cable is directly connected to the MF4150 and your computer.
  • Do NOT use a USB hub to connect the cable, as it may lead to a connection error.
  • Make sure the machine is not in the Sleep mode (i.e., [Energy Saver] key on the operation panel is leit). To exit the Sleep mode, press [Energy Saver] and confirm that the Energy Saver light is off.
  • You need to log on as an administrator to perform this update.
  • Make sure that no other applications are running on your computer.
6. If [Found New Hardware Wizard] appears on your PC screen, click [Cancel] to exit the screen.
  • [Found New Hardware Wizard] screen may be displayed multiple times. Cancel anytime you encounter this screen while performing this update.
7. Double-click ?MF4150_FirmwareUpdateTool_V0xx.exe? that you downloaded and saved.
8. . Double-click "MF4150_V0xx_FirmwareUST.exe" that is in the newly created folder as a result of uncompressed downloaded file.
9. Confirm that the machine is in the ready status, and then click [Transfer]
  • If the printer is not detected: Check if the printer's power is turned on and the USB cable is properly connected. Then click [Retry] to proceed.
10. The firmware is transferred to the printer.
  • Never turn of the power to the MF4150 while firmware is updating. If power interruption occurs while the firmware is being updated the control board will be damaged and will need to be replaced. The replacement of the control board and labor will not be covered under warranty.
  • If an error occurs while transferring the firmware: Check if USB cable is properly connected. Click [Retry] to proceed.
11. When [Firmware transfer is complete] appears, click [Exit].
The printer starts the update process automatically.
<ERASE FLASH ROM> appears on the printer's display while the existing firmware is being erased.
Then printer's display shows <FIRMWARE UPDATE> while updating the firmware.
When the firmware update is complete, the printer's display shows <FIRMWARE UPDATE OK> <MACHINE POWER OFF/ON>
12. Turn printer's power switch OFF, wait 2 seconds then turn the power switch back ON. Check that there is no error on the printer display. Reconnect removed fax line cable.

Feb 23, 2011 | Canon imageCLASS MF4150 All-In-One Laser...

1 Answer

50HPX95. Need Firmware\r\nHad a failed video board (PD2222C). I purchased and replaced this board with same revision, but tv thinks it is a 42" versus 50". Does anyone have the firmware to...


Notice (Read Prior to Beginning the Software Upgrade)

The following events may interrupt the upgrade process and result in an inoperative unit.

1) DO NOT unplug the Power Cord during the software update procedure

2) Avoid loss or interruption of power during the software update procedure

3) DO NOT Press the power button on the unit during the software update procedure
In the event of software upgrade failure please contact TOSHIBA Customer Service at 1-800-631-3811

Feb 11, 2011 | Toshiba 50HPX95 50 in. Plasma HDTV

1 Answer

Why its showing do noy touch during firmware upgrade


During a firmware update your phone needs to complete it without interruption otherwise your phone will be useless

Mar 05, 2010 | iRiver E100 Digital Media Player

2 Answers

Can the firmare on a basic MP3 player be upgraded to provide better access to music file


  1. Find out the manufacturer and model number
  2. Download the firmware update files and if they're inside a zip file, it's very important that you unzip every file before running the update or it may fail. Before you leave the manufacturer's website, see if they have any specific instructions on how to update the firmware. Also check to see if any instructions were included in the download. Samsung for example included a pdf file on how to run the update.
  3. Please note that it is VERY important that your computer remains on and doesn't freeze up during the update process. Close all other unnecessary programs before starting the update. Disable your antivirus and any other protection software so it doesn't stop the process. Norton and McAfee often like to interrupt the process because they assume something bad is going on. Also don't run an update during a thunderstorm because if your computer loses power in the middle of the process, that would be really bad.
    If anything interrupts the updating process before it's complete, your hardware will likely become a paperweight aka a brick. It will have a half updated, scrambled operating system and will cease to function completely. Some routers and other advanced hardware have a rollback feature just in case but not many other pieces of hardware do so be careful!
WARNING:
Make sure that the update process is not interrupted or it may break the hardware permanently

Sep 24, 2009 | Audio Players & Recorders

Not finding what you are looking for?
Canon imageCLASS  MF4150 All-In-One Laser Printer Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1983 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...