Question about Mitsubishi WD62627 62" HDTV

1 Answer

When I turn on the TV, nothing comes on. No pictures or sound. Red light comes on where it says lamp. Do I need to replace the lamp. Please kinldy advise . Ty

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Yes. You need to replace the lamp. Mine did this when my lamp burned out.

You can try pressing <menu> and <device> at the same time, and you'll get a code flashed out to you (tens digit followed by unit digit). You'll likely see one of the following codes:

  • 34 Lamp abnormality
  • 36 Lamp Ballast or exhaust fan failed.
  • 38 Lamp temperature too high
  • 42 Lamp Fan Failed
But the user's manual and the repair manual both say that a red lamp light means your lamp isn't working (most likely it needs to be replaced).

Posted on Aug 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashing red light saying lamp and no picture.


REPLACE LAMP !!!
Buy an Orginal Replacement Lamp.

May 19, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

SONY KDF-E55A20 5 red blinking lights on power button


Hi,
Symptom shows Lamp is weak in result and causing restart of TV again and again. Your TV requires new lamp as per following part number...
A1085447A* LAMP BLOCK ASSY XL-2200U
It is available in Sony Accessories Store for $200 and replacement procedure is written in instruction manual of TV.

Always buy Sony original lamp for TV and avoid aftermarket / cheap lamp for TV safety.

May 18, 2009 | Sony KV-36FV26 TV

1 Answer

Mitsubishi w52525 - replaced lamp and red light still on


could be the wrong lamp or not set right in housing or bad door switch.

May 03, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

No picture or sound mitsubishi 62525


Capacitor failure is the most likely scenario the FMT ans Signal PWB would cause the picture interference and the power pwb would cause the lamp light to turn red and give a 34 code when the device/ input and menu buttons are pressed in together and held for five seconds. That chassis has issues with every board in the chassis having failed capacitors you can get repair kits for the V26 chassis at the follwing link that come with instructions. Your model is the V26 chassis. Heres the link.
http://servicemanuals.vstore.ca/

Jan 25, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi DLP - model #WD62725


you have mention that after 10-15 seconds T.V starts up, will you give total description of the T.V within that 10-15 seconds?

Aug 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Panasonic PT-53WX42 - When I turn the TV on, the red light comes on but, no sound or picture.


Does the light blink? If it is blinking a 3 code, the IC's need to be replaced. Those three lamps as you called them are not lamps, they are the three picture tubes.

Jan 08, 2008 | Panasonic PT-53WX42 53" Rear Projection...

2 Answers

Mits 62525


take the lamp back out and reset the lamp

Dec 27, 2007 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD62627 62" HDTV Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

75178 Answers

Jaime Hernandez

Level 3 Expert

2335 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...