I have acer aspire 5600 windows is not working & try to alt+f10 button but they asking recovery password i forgeted what i will do? reg

Well not enough information , ALT PLUS F10 at the start logo Will send you to recovery factory mode
work it out from there ,to what you want to restore

Have you tried a System Restore/Recovery? Can you boot to safe mode? Try the restore/Recovery procedure: Shut down, unplug, remove battery, plug in, push the on button and When Acer splash is on screen hold Alt and keep pressing F10...

Hi,

It appears that the Windows is corrupted on your computer, you can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.
NOTE: This will erase all the datas on the computer.

If the above steps are not working then I am sorry to say that it is going for repair as the Hard disk might have corrupted.

Thanks and regards,
Jitha

Hi,

If you have lost Windows login password, then I would advise a full system recovery.

You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

Thanks and regards,
Jitha

Hi,

You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.

NOTE: This will erase all the datas on the computer.

Thanks and regards,
Jitha

For all Acer Netbooks try to initiate the recovery using Altgr key (righthand side of the space bar) and F10, ie Altgr+F10 as soon as the computer restarts. If the recovery partion is corrupted or do not have the CD. Try the below steps:
No Restore CD / eRecovery / password / ALT + F10 or F10
1 - Recovery of data on the hidden partition PQSERVICE for password
A - Installing the software R-Drive Image to create an image of this partition (this file has the extension. ARC)
B - Always with this software, create a virtual disk logic to see the files
C - From the desktop, go to the newly created virtual disk and find the file aimdrs.dat. The open with the notepad and get the password.
2 - Reactivating the ALT + F10
A - Always on the virtual disk created, find 2 files: mbrwrwin.exe and rtmbr.bin.
B - Copy these 2 files on drive C: \
C - Since the MS-DOS (Pocket PC) to C: \, type the following command: mbrwrwin install rtmbr.bin
D - The function has been reactivated.
3 - Start of Restoration
A - At the start of the PC, go to the set-up to check if the function is well on D2D enabled (normally it is a default setting ... but hey you never know.)
B - Once the audit and that the PC has restarted once the ACER logo appears, simultaneously press ALT + F10 to start the restore utility.
C - When it asks for the password, you need to type one found in the file aimdrs.dat. CAUTION: The keyboard is QWERTY mode so we thought enter his password, but as some letters are reversed, it does not work.
4 - Normally at this stage there ... everything works and restoration is smooth.
Note: If the operating system does not work, it is possible to do this from another PC by connecting the hard drive or USB slave
i found this helped me with exactly the same problem you have on the 7540g aspire laptop use the ALTGR on the right hand side of keyboard not the ALT on the left hand side of the keyboard along with F10 i tried it with just the ALT on the left side nothing happened but when used ALTGR on right side it woeked and reset everything back to factory settings then went to acer site and downloaded missing drivers hope this helps you out

Hi,
When you install Windows7, it will ask to create a password backup Cd. If you have created it well and good to restore password, if not not then please run a recovery on the computer. Please follow the steps below:
You can restore the computer back to factory default,to do so, follow the below steps:
Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

You need to remove the cover over the fan assembly, and look over to the side toward the hard drive, and you should see the cmos battery, you don't need to take the machine apart, just reach in with a small screwdriver and keep the battery disconnected for five or so minutes, then after you put the cover back on, the password will be gone

Have you tried running a virus scan, an adware scan and defragmented your drives?
These things should help speed it up.
If its still too slow after doing these things, try disabling programs from booting with windows (such as things in the system tray like yahoo messenger, msn, aol, etc)

Phone a technician, but not Geek Squad.